rgwan / open-ecLinks
Opensource embedded controller firmware for sipeed boards.
☆39Updated 6 years ago
Alternatives and similar repositories for open-ec
Users that are interested in open-ec are comparing it to the libraries listed below
Sorting:
- USB-Blaster instance on CH55x MCU.☆48Updated 5 years ago
- USB-JTAG Adapter Using CH552☆68Updated 3 years ago
- ☆25Updated 3 years ago
- L4:Cortex A5 GSM SoC RDA8810☆25Updated 5 years ago
- SDK sch&layout reference design and datasheet documention☆60Updated last year
- a cheap CMSIS-DAP debugger by an WCH chip named CH549F☆45Updated 4 years ago
- Winnermicro W60x Wi-Fi library reverse engineering notes & hackings☆18Updated 4 years ago
- CH552 Dual USB to Serial Bridge.☆78Updated 9 months ago
- Bare metal programming on the EBAZ4205 board with Zynq XC7Z010 SoC☆17Updated 5 months ago
- Opensource embedded controller firmware for sipeed boards.☆14Updated 6 years ago
- AGM bitstream utilities and decoded files from Supra☆42Updated last year
- WCH CH569 SerDes Reverse Engineering☆26Updated 2 years ago
- Port of https://github.com/eleqian/WiDSO/tree/master/MCU/USB-Blaster to GCC and "traditional" STM32F103C8T6 Bluepill board.☆42Updated 6 years ago
- Load bitstream to AG1K series FPGA using CH552☆12Updated 3 years ago
- Communication channel from FPGA (Alterra EP4CE10) and Linux (Lichee PI Allwinner V3S)☆29Updated 5 years ago
- The directory to save GD32VF103 Demo_Suites☆33Updated 4 years ago
- ☆43Updated 4 years ago
- A modern port of OpenOCD to WCH-Link RISC-V (see project wiki)☆22Updated 3 years ago
- ☆77Updated 5 years ago
- A tiny FPGA core module based on GW1NZ-LV1, CH552 and SLG46580☆24Updated 3 years ago
- This is the OpenOCD source code modified to support WCHlink and CH32Vxxx MCUs, received from MounRiver after my GPL request, and publishe…☆18Updated 2 years ago
- A low cost FPGA/CPLD dev-board based on AG1280Q48.☆66Updated 2 years ago
- f1c100s source code☆32Updated 6 months ago
- ESP8266 Xilinx Virtual Cable - wifi JTAG☆39Updated 4 years ago
- fpga co-processor for faster SWD programming☆17Updated 7 years ago
- Release KiteRF is a SDR system with K210 & FPGA & ESP32 as its core controller, which make SDR more intelligent, portable and cheap.☆25Updated 5 years ago
- CH55x USB to JTAG bridge☆132Updated 2 months ago
- JTAG Tools For FTDI MPSSE Transports☆12Updated 10 years ago
- Firmware for the FX2 which emulates the FTDI serial chips (including MPSSE support).☆14Updated 6 years ago
- Simple CH347 SPI-NOR programmer☆16Updated last year