smaeul / linux
Patches include sunxi platform support and various driver fixes
☆81Updated 3 months ago
Alternatives and similar repositories for linux:
Users that are interested in linux are comparing it to the libraries listed below
- Patches include sunxi platform support and various driver fixes☆42Updated last month
- Wrapper to Sipeed LicheeRV Nezha CM C906 boot0, opensbi, u-boot, kernel with tiny initramfs☆29Updated 3 years ago
- Datasheets and Reference Manual for BL602/BL808☆148Updated last year
- ☆129Updated last year
- WinChipHead CH341 linux driver for I2C, SPI and GPIO mode☆84Updated 3 weeks ago
- A modern port of OpenOCD to WCH-Link RISC-V (see project wiki)☆21Updated 3 years ago
- small linux bootloader for Allwinner T113-S3 and V851s☆87Updated 5 months ago
- ☆61Updated 3 years ago
- Evaluation board for AllWinner's RISC-V 64 SoC F133/D1s☆212Updated 3 years ago
- Mainline-friendly SPL for D1☆34Updated 2 years ago
- Debian disk image builder for the Sipeed Lichee RV Risc-v Single Board Computer☆60Updated last year
- Documentation of the BL602 IC☆65Updated 2 years ago
- Reverse engineering, notes, and example code for the RISC-V MCU inside the RK3566 SoC☆31Updated last year
- Config files for full Lichee Pi Nano Linux image build☆118Updated last year
- Collection of Allwinner firmware binaries and RE tools☆48Updated last year
- RISC-V Archlinux D1 LicheeRV image builder☆117Updated 5 months ago
- ☆43Updated 4 years ago
- Allwinner V3s Boot ROM Reverse Engineering☆15Updated 4 years ago
- ☆64Updated 2 months ago
- Run an executable from RAM on a Bouffalo MCU (BL602 or BL808)☆22Updated 2 years ago
- SyterKit is a baremetal framework, As bootloader, MPU framework, Running on SRAM☆112Updated 3 weeks ago
- Allwinner document collection☆52Updated last week
- OpenBouffalo Firmware Repository☆36Updated last year
- Tiny FEL tools for allwinner SOC, support RISC-V D1 chip☆262Updated 3 weeks ago
- Sipeed Lichee RV Allwinner D1 RISC-V☆27Updated 2 years ago
- Opensource embedded controller firmware for sipeed boards.☆38Updated 6 years ago
- This is the OpenOCD source code modified to support WCHlink and CH32Vxxx MCUs, received from MounRiver after my GPL request, and publishe…☆18Updated 2 years ago
- Rust-based Command Line Tool for WCH MCU USB-ISP Programming☆217Updated 3 months ago
- Single-chip solution for Hi-speed USB2.0(480Mbps) JTAG/SPI Debugger based on RISC-V MCU CH32V30x/CH32V20x☆110Updated last year
- Zephyr OS running on Milk-V Duo secondary processor