YuzukiHD / Buildroot-YuzukiSBC
Buildroot Package Mainly for YuzukiHD Devices. Support Allwinner F1C100s/200s V3s V3x D1-H D1s T113 H616 BSP and Mainline
☆167Updated last year
Alternatives and similar repositories for Buildroot-YuzukiSBC:
Users that are interested in Buildroot-YuzukiSBC are comparing it to the libraries listed below
- Buildroot Package for F1C100s/200s☆182Updated last year
- 该项目是为全志 F1C100S/F1C200S 所编写的库函数,编写风格模仿 STM32 标准库,使得从 STM32 过来的人更容易上手。项目已经移植了 cherryusb、fatfs、lvgl、rt-thread。☆109Updated 10 months ago
- Bare metal code examples for Allwinner's F1C100S (F1C200S) SOC☆84Updated 2 months ago
- Yuzukilizard is a Small Heterogeneous & AI Powered Dev Board Based on Allwinner V851S☆165Updated last year
- ☆66Updated 3 years ago
- SyterKit is a baremetal framework, As bootloader, MPU framework, Running on SRAM☆110Updated this week
- Linux kernel module to use ESP8089 / ESP8266 over SPI☆65Updated 5 years ago
- hdmi converter based on lt8619C or rtd2668☆70Updated 3 years ago
- Allwinner V3S Opensource☆262Updated 4 years ago
- 基于CH55x低成本USB单片机实现的汇编级优化高速DAP-Link-v2☆95Updated last year
- [OSHW] Yuzuki Chameleon is a Raspberry Pi A Shaped SBC based on Allwinner H616☆231Updated 10 months ago
- Allwinner T113-S3 SMP A7 Buildroot Project.☆35Updated 2 years ago
- ☆64Updated last year
- M5Pi is an open source Linux embedded development board, using Allwinner F1C200s CPU, and has a beautiful shell.☆187Updated 7 months ago
- F1C200S PCB and SCH☆71Updated 4 years ago
- WIRELESS CMSIS-DAP USB/IP-SWD/JTAG HID adapter firmware for ESP8266 boards☆104Updated 7 years ago
- elaphureLink is a CMSIS-DAP compliant debugger solution for Arm® Keil® µVision® IDE that provides conversion between TCP/IP and DAP.☆144Updated 2 months ago
- "Das U-Boot" Source Tree☆137Updated last year
- Allwinner T113s3 Tina4SDK☆27Updated 2 weeks ago
- ☆50Updated last year
- F1C100s with Keil RTX4 + emWin5☆144Updated 11 months ago
- Buildroot Package for R3c ( F1C200s )☆52Updated 3 years ago
- a win10 IDD graphic driver for esp32-s2 usb display, also can modify for other MCU device with usb☆143Updated 2 weeks ago
- Buildroot support for Allwinner V3s/S3/S3L☆43Updated 4 months ago
- BoloPi software code base on rtthread f1c100s☆55Updated 2 years ago
- Low-level libraries and bare metal projects for allwinner F1C100s SOC☆127Updated 2 years ago
- Open Source Hardware HDMI into MIPI DSI-2 converter, Source code for HDMI-To-MIPI, use TC358870XBG and STM32F103C8T6. …☆99Updated 6 months ago
- 使用ESP32S2做的DAP☆37Updated 4 years ago
- DAPLink (CMSIS-DAP) porting to Artery AT32F425, WCH CH32V203 and WCH CH32V305.☆255Updated last week
- Command-line access to F1C100s GPIO☆24Updated 5 years ago