smaeul / u-bootLinks
Patches include sunxi platform support and various driver fixes
☆42Updated 2 months ago
Alternatives and similar repositories for u-boot
Users that are interested in u-boot are comparing it to the libraries listed below
Sorting:
- Patches include sunxi platform support and various driver fixes☆81Updated 4 months ago
- ☆43Updated 4 years ago
- Wrapper to Sipeed LicheeRV Nezha CM C906 boot0, opensbi, u-boot, kernel with tiny initramfs☆29Updated 3 years ago
- Collection of Allwinner firmware binaries and RE tools☆48Updated last year
- Allwinner V3s Boot ROM Reverse Engineering☆15Updated 4 years ago
- Mainline-friendly SPL for D1☆34Updated 2 years ago
- Reverse engineering, notes, and example code for the RISC-V MCU inside the RK3566 SoC☆32Updated last year
- Apache NuttX RTOS for Pine64 Star64 64-bit RISC-V SBC (StarFive JH7110)☆26Updated this week
- Run an executable from RAM on a Bouffalo MCU (BL602 or BL808)☆22Updated 2 years ago
- A baremetal experiment of Allwinner D1, without FEL☆32Updated 2 years ago
- OpenBouffalo Firmware Repository☆36Updated last year
- Sipeed Lichee RV Allwinner D1 RISC-V☆28Updated 2 years ago
- ☆61Updated 3 years ago
- ☆24Updated 3 years ago
- A modern port of OpenOCD to WCH-Link RISC-V (see project wiki)☆22Updated 3 years ago
- Small footprint, low dependency, C code implementation of a FAT16 & FAT32 driver.☆66Updated 6 years ago
- Datasheets of Ingenic SoCs. Distribute as you want!☆16Updated 8 months ago
- Decompiled DDR memory init for Allwinner Tech T113-s3 SoC☆11Updated 2 years ago
- Debian disk image builder for the Sipeed Lichee RV Risc-v Single Board Computer☆60Updated last year
- ☆64Updated 2 months ago
- Buildroot, making embedded Linux easy.☆18Updated 10 months ago
- buildroot fork☆36Updated 3 weeks ago
- riscv64 d1-nezha baremeta(Allwinner D1 riscv chip)☆80Updated 3 years ago
- Documentation of the BL602 IC☆65Updated 2 years ago
- ☆20Updated last year
- A simple framework to boot an Allwinner H3 SoC and run bare metal code☆26Updated 6 years ago
- ☆22Updated last year
- memtool is a program that allows to access memory mapped registers.☆27Updated 3 years ago
- Opensource embedded controller firmware for sipeed boards.☆39Updated 6 years ago
- Datasheets and Reference Manual for BL602/BL808☆149Updated 2 years ago