jstormx / Planetary-cycloidal-reducerLinks
行星摆线减速器
☆15Updated last year
Alternatives and similar repositories for Planetary-cycloidal-reducer
Users that are interested in Planetary-cycloidal-reducer are comparing it to the libraries listed below
Sorting:
- 基于SimpleFOC官方开源的动量轮倒立摆项目,低成本化和小型化后应用在DengFOC上☆55Updated 3 years ago
- 摆线针式减速器☆45Updated 4 years ago
- FOC控制算法☆50Updated 2 years ago
- A normal Hexapod☆83Updated 2 years ago
- ☆72Updated 2 years ago
- 菠萝万能控制器,是一个由灯哥开源的,基于Apache开源协议和ESP32主控芯片的低成本四足机器人控制器,控制器集成了全部四足机器人的必须硬件,完美支持 Py-Apple Dynamics 系列开源四足控制软件☆86Updated 3 years ago
- 基于SimpleFOC官方开源的平衡车项目深度改进而来,低成本化和客制化之后应用在DengFOC上☆88Updated 3 years ago
- Magnetic Levitation System based on STM32F407☆145Updated last year
- The super capacitor project of RM2024 Enterprize. Both Hardware and Software are included.☆55Updated last year
- A simple arm.☆70Updated 4 months ago
- A GUI based in PyQT5 and PyQtGraph to configure and control SimpleFOC devices.☆243Updated 3 weeks ago
- 机器人关节驱动☆31Updated 4 years ago
- Seasky-ODrive☆113Updated last year
- Haoqi's FOC drive software☆28Updated 2 weeks ago
- 三相直流无刷电机驱动器硬件☆97Updated 2 months ago
- 这是菠萝狗四足机器人开源项目的分支,菠萝无刷系列开源四足机器人的专门仓库☆112Updated 3 years ago
- it is a super-mini FOC Driver used by STM/GD32F405RGT6☆216Updated 3 years ago
- 包含软硬件设计,STM32F411主控,实现5KHz电流环,1KHz速度和位置环,软件可移植性强,可根据需要更换不同主控或使用不同驱动方案,当前项目硬件成本大概70RMB☆102Updated 3 months ago
- ROS机器人仓库☆150Updated 2 years ago
- 全开源的大功率电机驱动(Fully Open-Source High-Power Motor Drive)☆208Updated 9 months ago
- ☆21Updated last year
- A BLDC motor driver using FOC algorithm.☆154Updated 3 years ago
- 这是一个用于学习foc而设计的开发板☆33Updated last year
- 基于稚晖君的Dummy机械臂核心板REF_Uint设计的REF_Base☆17Updated last year
- 轮腿机器人:主控esp32 ,陀螺仪MPU6050,PM3510无刷电机和simplefoc驱动器。☆498Updated 3 years ago
- 达妙H723开发板姿态解算,惯导姿态解算项目,扩展卡尔曼滤波,Mahony☆47Updated last year
- Arduino Shiled for running Gimbal BLDC motors with FOC algorithm☆558Updated 6 months ago
- 灯哥开源的,可用于搭载 Py-Apple Controller 控制器和 Py-Apple Dynamics 四足控制软件的机械结构项目。目前包含有两种构型的机器狗(串联腿/并连腿),均可完美适配现有开源程序。机械结构经过长时间生产认证,结构稳定,安装简易。☆138Updated 3 years ago
- A project for wheel-legged balance robot☆25Updated 7 months ago
- CAN peripheral interface for Intel NUC and other x86 device. 用于英特尔 NUC及其它x86架构的平台CAN的外设接口☆76Updated 2 years ago