Alternatives and similar repositories for ArgonServoDriveFirmware

Users that are interested in ArgonServoDriveFirmware are comparing it to the libraries listed below

• eez-open / CF-DIC
  Current-fed dual inductor converter with wide input and output voltage range
  ☆20Updated 6 years ago
• FPGA-Computer / UPS
  My HaD UPS + Switch Mode Power Supply repository
  ☆17Updated 7 years ago
• tumanako / tumanako-inverter-fw-motorControl
  ☆23Updated 7 years ago
• langwadt / grbl_stm32
  grbl for stm32 with nucleo stepper drivers
  ☆33Updated 4 years ago
• elmot / open-oscilloscope-stm32f3
  Open-Source Oscilloscope based on STM32F3-DISCOVERY board
  ☆38Updated 4 years ago
• LinuxCNC / hostmot2-firmware
  HostMot2 FPGA firmware
  ☆22Updated 4 years ago
• esden / floss-jtag
  Free Libre Open-Source/-Hardware JTAG/UART adapter based on FTDI2232H
  ☆32Updated 9 years ago
• paltatech / half-bridge
  TO247 half bridge module for EVs
  ☆16Updated 7 years ago
• cinderblock / 3-Phase-Controller
  Firmware for 3 Phase BLDC controller
  ☆41Updated 5 years ago
• sfgit / FPGA_Arduino_Shield
  FPGA-based shield for Arduino
  ☆73Updated 10 years ago
• andysworkshop / awreflow
  Andy's Workshop Reflow Oven Controller
  ☆33Updated 8 years ago
• pointhi / HighPower-Mechaduino
  Mechaduino derivative which drives up to 10A, drawn using KiCad
  ☆30Updated 6 years ago
• xboxhacker / OpenFeeder
  OpenSource feeder for DIY and OpenPNP community
  ☆35Updated 10 years ago
• mhouse1 / mechsoftronic
  FPGA based CNC Machine
  ☆95Updated 6 years ago
• smdprutser / SWM050
  ☆19Updated 7 years ago
• martinribelotta / h730duino
  STM32H7 Arduino form factor and software compatible board
  ☆36Updated 4 years ago
• terjeio / CNC_Breakout_Nucleo64
  CNC breakout for STM324F411 and ST32F446 development boards
  ☆22Updated 2 years ago
• watterott / HDMI-Adapter
  Universal HDMI/DVI Displays with Touch Panel for Raspberry Pi, BeagleBone, ODROID, UDOO...
  ☆73Updated 5 years ago
• jankae / battery-sim
  A voltage source imitating the behaviour of a battery
  ☆14Updated 6 years ago
• DieBieEngineering / DieBieMPPT
  This is my MPPT project I am doing for a solar boat racing application called the DieBieMPPT
  ☆17Updated 8 years ago
• Jana-Marie / USB-PD-Firmware
  USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware
  ☆30Updated 6 years ago
• pekkaroi / ethernetcnc
  ☆14Updated 7 years ago
• ketszim97 / USB_PD_Sink
  USB Sink based around the STUSB4500
  ☆27Updated 5 years ago
• bdring / PSoC_Grbl
  PSoc5 Port of Grbl CNC Controller
  ☆36Updated 8 years ago
• estechnical / reflowOvenController
  ESTechnical Reflow Oven Controller source code and instructions
  ☆47Updated 11 years ago
• lujji / blackmagic
  In application debugger for ARM Cortex microcontrollers.
  ☆32Updated 8 years ago
• tinkercnc / spi-fpga-driver
  LinuxCNC to fpga-over-spi driver
  ☆25Updated 9 years ago
• jrsikken / ElectronicLoadR2
  Hardware of Jasper's Electronic Load R2
  ☆22Updated 7 years ago
• adafruit / Adafruit-MAX31865-PCB
  PCB files for the Adafruit MAX31865 RTD Sensor Breakout
  ☆19Updated 6 years ago
• open-bldc / obldc2-firmware
  Open-Source Brushless Drive Controller Firmware
  ☆26Updated 12 years ago