kingyoPiyo / Tang-Nano_I2C_Monitor
I2C Bus monitor on Tang-Nano FPGA
☆14Updated 3 years ago
Alternatives and similar repositories for Tang-Nano_I2C_Monitor:
Users that are interested in Tang-Nano_I2C_Monitor are comparing it to the libraries listed below
- USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569☆25Updated 2 years ago
- A flexible, simple, yet powerful FPGA development board.☆15Updated 6 years ago
- WCH CH569 SerDes Reverse Engineering☆26Updated 2 years ago
- High Speed Data Acquisition over HDMI - FPGA implementation☆35Updated last month
- Example designs for the Spartan7 "S7 Mini" FPGA board☆28Updated 5 years ago
- RP2040 MCU based PMOD☆20Updated last month
- DVI PMOD adapter (HDMI connector)☆28Updated 3 years ago
- ESP8266 powered Xilinx Virtual Cable - Xilinx WiFi JTAG!☆23Updated 3 years ago
- The DDR Test Firmware for LicheeTang20K.☆16Updated last year
- Update IceStudio to support ColorLight 5A-75X, i5 and ICeSugar Pro FPGA boards☆47Updated last year
- ULPI Link Wrapper (USB Phy Interface)☆25Updated 4 years ago
- Couple of scripts which checks length matching of your KiCad design.☆26Updated 8 years ago
- Bare metal programming on the EBAZ4205 board with Zynq XC7Z010 SoC☆14Updated last month
- USB-Blaster instance on CH55x MCU.☆47Updated 5 years ago
- A basic HyperRAM controller for Lattice iCE40 Ultraplus FPGAs☆59Updated 6 years ago
- Test of a RP2040 PMOD attached to a LiteX SoC.☆25Updated last year
- Fully featured implementation of Inter-IC (I2C) bus master for FPGAs☆24Updated 4 years ago
- IceCore Ice40 HX based modular core☆46Updated 3 years ago
- An attempt to reverse engineer a bitstream made for an AL3-10 FPGA☆14Updated 2 years ago
- Siglent SDS 1x0xX-E hardware information☆19Updated 6 years ago
- usb-jtag - Altera USB Blaster Emulation with a FX2☆70Updated 3 years ago
- Firmware to implement USB communications on the CH32V307 microcontroller☆11Updated last year
- PCB combining Raspberry Pi Pico and iCE40 FPGA☆31Updated 8 months ago
- Board definition files and initial example programs☆12Updated 3 years ago
- Altera "USB_Blaster" clone using Teensy 3.5 microcontroller☆19Updated 4 years ago
- A general slow DDR3 interface. Very little resource consumption. Suits for all FPGAs with 1.5V IO voltage.☆37Updated 8 months ago
- USB PD cc pin monitor implemented in a Tang Nano 9K FPGA.☆15Updated 11 months ago
- Use ECP5 JTAG port to interact with user design☆26Updated 3 years ago
- AGM bitstream utilities and decoded files from Supra☆41Updated 9 months ago
- Xilinx 7-series FTDI-FPGA interface through JTAG with 125 us roundtrip latency☆19Updated 5 years ago