Alternatives and similar repositories for Soft-Propeller:

Users that are interested in Soft-Propeller are comparing it to the libraries listed below

• AnttiLukats / HackaZynq
  Open Source ZYNQ Board
  ☆31Updated 9 years ago
• AnttiLukats / DIPSY
  ☆23Updated 9 years ago
• xesscorp / XuLA2
  Everything to do with the XuLA2 FPGA board: schematics, layout, firmware, example FPGA designs, documentation, etc.
  ☆52Updated 9 years ago
• alvieboy / ZPUino-HDL
  ZPUino HDL implementation
  ☆89Updated 6 years ago
• barawn / xvcd-anita
  XVCD implementation for ANITA. Note that "ftdi_xvc_core.c" is a generic libftdi-based MPSSE XVC handler, and is awesome.
  ☆18Updated 4 years ago
• mwelling / beagle-wire
  ICE40 FPGA Cape for Beaglebone
  ☆51Updated 4 years ago
• myriadrf / Parallella-RF
  300 MHz to 3800 MHz TCVR daughter card for the Parallella board
  ☆18Updated 10 years ago
• devbisme / CAT-Board
  The CAT Board is a Raspberry Pi HAT with a Lattice iCE40HX FPGA.
  ☆61Updated last year
• AnttiLukats / OZOM-Model-A
  Open Hardware Zynq System on Module
  ☆29Updated 9 years ago
• scarabhardware / miniSpartan6-plus
  ☆75Updated 9 years ago
• pmezydlo / BeagleWire
  This repository contains software for BeagleWire. It is a realization of my project for GSOC-2017
  ☆46Updated 6 years ago
• blackmesalabs / ice_zero_prog
  Python for BitBanging SPI PROM on IceZero FPGA board from RaspPi GPIO pins
  ☆13Updated 6 years ago
• mwelling / pocketbone-kicad
  Smalls mint tin sized BeagleBone (KiCAD version)
  ☆58Updated 6 years ago
• jacgoudsmit / P1V
  Propeller 1 design and example files to be run on FPGA boards.
  ☆21Updated 5 years ago
• emeb / iceRadio
  C and Verilog sources for STM32F303 + iCE5LP4K Software Defined Radio
  ☆80Updated 8 years ago
• apertus-open-source-cinema / alpha-hardware
  Axiom Alpha prototype hardware source files (electronic schematics, documentation, PCB layouts, etc.)
  ☆22Updated 10 years ago
• n8vi / pru-dds
  Highly configurable Beaglebone PRU-based DDS
  ☆37Updated 7 years ago
• embmicro / mojo-arduino
  This is the base code using by the Mojo V3 to load the FPGA and act as a USB to serial port/ADC for the FPGA. This code is intended to be…
  ☆35Updated 6 years ago
• GadgetFactory / Papilio-DUO
  Papilio DUO FPGA board
  ☆28Updated 10 years ago
• hexagon5un / hackaday_supercon_2019_logic_noise_FPGA_workshop
  Hackaday Supercon 2019 Logic Noise Badge Workshop
  ☆28Updated 5 years ago
• GadgetFactory / Arduino-Soft-Core
  ☆64Updated 11 years ago
• wd5gnr / verifla
  Fork of OpenVeriFla - FPGA debugging logic analyzer to use with your designs - examples (so far) for ice40/IceStorm
  ☆33Updated 6 years ago
• fpga-logi / logi-projects
  ☆65Updated 9 years ago
• krtkl / open-source-schematics
  released krtkl schematics
  ☆57Updated 6 years ago
• tinyfpga / TinyFPGA-A-Programmer
  Low-cost (or free) programmer for TinyFPGA A-Series boards
  ☆41Updated 2 years ago
• myriadrf / LMS7002M-driver
  A portable driver for the LMS7002M dual transceiver
  ☆29Updated 3 years ago
• xesscorp / StickIt
  StickIt! board and modules that support the XuLA FPGA board.
  ☆20Updated 9 years ago
• lawrie / verilog_examples
  Example code in Verilog for the Blackice II FPGA
  ☆27Updated 5 years ago
• mattvenn / fpga-sram
  mystorm sram test
  ☆27Updated 7 years ago
• OSHChip / OSHChip_V1.0_Docs
  Schematics, Gerbers, Bill of materials
  ☆34Updated 9 years ago