Alternatives and similar repositories for open_evse

Users that are interested in open_evse are comparing it to the libraries listed below

• CurtRod / SimpleEVSE-WiFi
  Brings EVSE WB/DIN into your WiFi
  ☆81Updated 2 years ago
• OpenEVSE / open_evse
  Firmware for Open EVSE
  ☆134Updated 6 months ago
• botaneta / JKbms_Emu_Pylon
  Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32
  ☆11Updated 2 months ago
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆78Updated last year
• SmartEVSE / SmartEVSE-3
  Smart Electric Vehicle Charging Station (EVSE)
  ☆168Updated last week
• Uksa007 / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆187Updated 9 months ago
• txubelaxu / esphome-jk-bms
  ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v1…
  ☆56Updated 3 months ago
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆89Updated last week
• Tobi177 / venus-chargerybms
  Driver to embed the Chargery BMS to a Venus OS device
  ☆33Updated last year
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆160Updated this week
• jens18 / lgresu
  LG Resu 10 LV Monitor
  ☆29Updated 5 years ago
• Ackmaniac / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆17Updated last month
• irekzielinski / Pylontech-Battery-Monitoring
  Adding WiFi monitoring to US2000B and US2000C batteries.
  ☆147Updated 2 years ago
• nickn17 / evDash
  EV dashboard - software for small dev boards connected to the car via obd2 BLE4 or CAN bus.
  ☆147Updated 5 months ago
• dingo35 / ha-SmartEVSEv3
  Integrate SmartEVSEv3 with HomeAssistant through custom component
  ☆15Updated 2 months ago
• playersz28 / JBD-ESP32
  ESP32 interface for JBD BMS
  ☆12Updated 3 years ago
• OpenEVSE / openevse_esp32_firmware
  OpenEVSE V4 WiFi gateway using ESP32
  ☆198Updated 2 weeks ago
• Sleeper85 / esphome-yambms
  Yet another multi-BMS Merging Solution
  ☆107Updated this week
• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485
  ☆98Updated last week
• NEEY-electronic / JK
  ☆64Updated 2 years ago
• SunshadeCorp / can-service
  Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.
  ☆33Updated 4 months ago
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆84Updated 3 months ago
• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆172Updated 2 months ago
• scottwday / InverterOfThings
  ESP8266 based WiFi interface for Voltronic Axpert MppSolar PIP inverters
  ☆41Updated 4 years ago
• PurpleAlien / jk-bms_grafana
  Read data from a JK BMS and graph it in Grafana
  ☆55Updated 5 months ago
• meteosat007 / solar-pylontech
  How to connect to a Sofar HYD3600 Inveter and 2 Pylontech US3000 batteries
  ☆20Updated 4 years ago
• ai-republic / bms-to-inverter
  Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an invert…
  ☆174Updated last month
• serkri / SmartEVSE-3
  Smart Electric Vehicle Charging Station (EVSE)
  ☆74Updated last year
• syssi / esphome-virtual-can-bms
  ESPHome component to emulate a SMA/Victron compatible BMS via CAN bus
  ☆16Updated last week
• aaronsb / victronvenussupport
  Support files for managing and deploying my Victron Venus OS stuff
  ☆19Updated 5 years ago