k-korn / tm3-can-loggerLinks
☆16Updated 3 years ago
Alternatives and similar repositories for tm3-can-logger
Users that are interested in tm3-can-logger are comparing it to the libraries listed below
Sorting:
- Control power delivered by a Tesla Wall Charger using two wires screwed into its RS-485 terminals.☆193Updated 2 years ago
- Smart (Tesla) charging with a Tesla Wall Connector (and some Python code)☆24Updated 7 years ago
- Firmware and Documentation for the CANserver☆106Updated 2 years ago
- CAN to BlueTooth Adapter for ScanMyTesla on ESP32☆59Updated last year
- Control power delivered by a Tesla Wall Charger using two wires screwed into its RS-485 terminals.☆151Updated 3 months ago
- Read ELM327 from Nissan Leaf, modern customizable interface.☆23Updated 7 years ago
- Tesla CAN bus messages and signals for 3, Y, S and X☆11Updated 2 years ago
- OpenEVSE V4 WiFi gateway using ESP32☆209Updated last week
- EV dashboard - software for small dev boards connected to the car via obd2 BLE4 or CAN bus.☆159Updated 4 months ago
- My Blog☆132Updated 6 years ago
- Opens the chargeport of a Tesla Model S☆80Updated 5 years ago
- Firmware for Open EVSE☆141Updated 11 months ago
- ☆16Updated 4 years ago
- A scraper for power devices to feed data to OpenEnergyMonitor☆35Updated 8 months ago
- A Tesla Wall Connector (TWC) controller that talks to TWCs via the RS485 protocol☆15Updated 2 years ago
- ☆44Updated 2 years ago
- SolarEdge Modbus data collection library☆162Updated 11 months ago
- Retrieve information from the Volvo On Call (VOC) web service☆160Updated 2 years ago
- Setting up Torque Pro to show OBD data on Hyundai / Kia Electric Vehicles☆258Updated 4 years ago
- Backend for EVNotify (https://github.com/EVNotify/EVNotify)☆22Updated 2 years ago
- Python API for Tesla Powerwall and Solar Power Data☆183Updated this week
- ☆121Updated 2 weeks ago
- Python API for Tesla Powerwall☆80Updated 10 months ago
- Venus OS service mapping the D-Bus on Venus OS to MQTT☆117Updated last year
- Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.☆36Updated 10 months ago
- Interact with Tesla vehicles over BLE using ESPHome and Home Assistant☆258Updated 3 weeks ago
- EVNotify allows you to monitor your electric vehicle and let you notify when the specified preset state of charge has been achieved.☆218Updated 3 years ago
- ☆10Updated last year
- Brings EVSE WB/DIN into your WiFi☆83Updated 2 years ago
- API Scraper for pulling Vehicle Statistics from the Tesla Owner API into an InfluxDB + Grafana Dashboards☆366Updated 6 years ago