Alternatives and similar repositories for common_libraries

Users that are interested in common_libraries are comparing it to the libraries listed below

• normaldotcom / canblaster
  Utility to forward SocketCAN canbus traffic over UDP to Cangaroo and other applications
  ☆22Updated 2 years ago
• linklayer / cantact-pro-fw
  Firmware for the CANtact Pro
  ☆47Updated 2 years ago
• kdschlosser / vector_dbc
  Vector CANdb++ file parser
  ☆23Updated last year
• arturlangner / Open-OBD2-datalogger
  Plug-in datalogger that saves live engine data to SD card.
  ☆23Updated 7 years ago
• moonglow / kvaser_cantact
  Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.
  ☆46Updated 3 years ago
• togglebit / CANFDuino
  ☆30Updated 8 months ago
• krumboeck / usb2can_firmware
  ☆17Updated 9 years ago
• saleae / can-analyzer
  Saleae Controller Area Network (CAN) Analyzer
  ☆23Updated last week
• sebi2k1 / openCanSuite
  ☆30Updated 8 years ago
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆66Updated 4 months ago
• linklayer / cantact-pro-hw
  Hardware design files for the CANtact Pro
  ☆73Updated 4 years ago
• jgressmann / supercan
  This is project SuperCAN. An open source USB to CAN-FD protocol.
  ☆85Updated 3 weeks ago
• beyerch / DHP_Kepler
  Automotive Vehicle Interface Hardware (CAN / VPW / A2D / BT 4.1 / USB / SDCARD)
  ☆37Updated 6 years ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆70Updated 6 years ago
• roboterclubaachen / usb2can
  ☆50Updated 5 years ago
• IntergatedCircuits / CanDybugFW
  CAN bus gateway over USB
  ☆21Updated 3 years ago
• autosportlabs / OBD2CAN
  Provides a bridge between any OBD2 compliant vehicle and the CAN bus interface.
  ☆44Updated 5 years ago
• marcinbor85 / can-prog
  Command-line tool to flashing devices by CAN-BUS
  ☆83Updated 5 years ago
• UsbCANConverter-UCCbasic / UCCB_GS_Embedded
  gsusb firmware for USB CAN converter
  ☆15Updated 3 years ago
• DanielMartensson / GoobySoft
  General software for logging and controlling devices. Controlling Modbus, CAN bus via STM32PLC etc
  ☆36Updated 2 months ago
• darkspr1te / J2534-pic
  *on hold * Implement J2534 interface with a cheep Chinese elm327 copy (pic18f25k80)
  ☆17Updated 7 years ago
• fpoussin / MotoLink
  K-line/Serial/CAN interface and fuel mapper for motorcycles.
  ☆90Updated 5 years ago
• gregjhogan / openioc
  Control your car inputs (e.g. switches) and outputs (e.g. lights) with software over CAN
  ☆27Updated 4 years ago
• collin80 / GEVCU
  Generalized Electric Vehicle Control Unit
  ☆119Updated 2 years ago
• m10k / canny
  Simple CAN-over-IP gateway
  ☆28Updated 2 years ago
• DieselDuz42 / Arduino-CAN-bus-SD-logger
  Arduino script to log CAN bus information to SD card. Mainly focused on J1939.
  ☆24Updated 5 years ago
• damienmaguire / Tesla-Model-3-Drive-Unit
  Open Source logic board for the Tesla Model 3 rear drive unit. PCB Files in DesignSpark 8 format.
  ☆59Updated last month
• MHS-Elektronik / CANcool
  Open Source CAN bus Analyser and Simulation Software
  ☆62Updated 2 months ago
• kurt-vd / test-can-j1939
  Readme + howto for can-j1939
  ☆41Updated 7 years ago
• TDahlmann / canpp
  CAN bus analyzing and simulation GUI tool for Windows.
  ☆69Updated 5 months ago