Alternatives and similar repositories for hardware-components

Users that are interested in hardware-components are comparing it to the libraries listed below

• mattvenn / basic-ecp5-pcb
  Reference design for Lattice ECP5 FPGA. Featuring Raspberry Pi interface and 6 PMODs
  ☆115Updated 4 years ago
• joshajohnson / ecp5-mini
  ECP5 FPGA in an "S7 Mini" form factor
  ☆83Updated 4 years ago
• no2fpga / no2bootloader
  USB DFU bootloader gateware / firmware for FPGAs
  ☆68Updated 10 months ago
• ultraembedded / openlogicbit
  Open-source Logic Analyzer gateware for various FPGA dev boards/replacement gateware for commercially available logic analyzers.
  ☆149Updated 4 years ago
• mattvenn / first-fpga-pcb
  FPGA dev board based on Lattice iCE40 8k
  ☆71Updated 5 years ago
• blackmesalabs / sump3
  sump3 logic analyzer
  ☆27Updated this week
• intergalaktik / ulx4m
  PCB for ULX4M FPGA R&D board
  ☆53Updated 4 months ago
• galacticstudios / KiCadVerilog
  Generate Verilog code from a KiCad netlist
  ☆61Updated 9 months ago
• splinedrive / my_hdmi_device
  New clean hdmi implementation for ulx3s, icestick, icoboard, arty7, colorlight i5 and blackicemx! With tmds encoding hacked down from dvi…
  ☆103Updated 2 weeks ago
• swetland / ethernet-pmod
  Ethernet PHY PMOD (Microchip LAN8720A PHY)
  ☆45Updated 3 years ago
• ICE-V-Wireless / ICE-V-Wireless
  Combined ESP32C3 and iCE40 FPGA board
  ☆69Updated 7 months ago
• MichaelBell / spi-ram-emu
  SPI RAM Emulation on Pico
  ☆31Updated 2 years ago
• controlpaths / litefury_rp5
  Conecting the Litefury FPGA accelerator to Raspberry Pi 5 over PCIe gen2 x1
  ☆33Updated last year
• QuickLogic-Corp / quicklogic-fpga-toolchain
  Open Source FPGA toolchain and documentation for QuickLogic devices and eFPGA IP
  ☆39Updated 4 years ago
• butterstick-fpga / butterstick-hardware
  Basic ECP5 based GigE to SYZYGY interface.
  ☆204Updated last year
• openXC7 / openXC7-snap
  snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support
  ☆29Updated last year
• antmicro / gerber2ems
  Python interface to OpenEMS, for PCB trace simulation. Accepts Gerber files as input. Features automatic grid generation and postprocess…
  ☆149Updated 3 weeks ago
• gregdavill / ecpprog
  Programmer for the Lattice ECP5 series, making use of FTDI based adaptors
  ☆91Updated 9 months ago
• circuitvalley / ultrazed_base_boards
  This repository contains Design files for Various Base board Designed for Avnet Zynq Ultrascale+ FPGA SOC
  ☆20Updated 2 months ago
• mkvenkit / humble_ice
  A low cost FPGA development board based on Lattice iCE40UP5k and Raspberry Pi RP2040.
  ☆45Updated 2 years ago
• psychogenic / riffpga
  riffpga -- write FPGA bitstreams through a USB drive, get USB serial and dynamic clocking in a platform independent way
  ☆68Updated 6 months ago
• esden / KiBus
  KiCad bus length matching script.
  ☆31Updated last year
• GMM-7550 / gmm7550-hardware
  CologneChip GateMate FPGA Module: GMM-7550
  ☆22Updated this week
• devbisme / KiCad-Schematic-Symbol-Libraries
  Schematic symbol libraries for FPGAs & microcontrollers.
  ☆102Updated 3 years ago
• OneKiwiTech / kicad-length-matching
  Track Length Calculator
  ☆24Updated last year
• oskirby / logicbone
  Logicbone ECP5 Development Board
  ☆117Updated 5 years ago
• Efinix-Inc / xyloni
  This repo is for Efinix Xyloni development board users. It has projects and software to get you started working with the board.
  ☆42Updated 2 years ago
• mithro / kicad-pmod
  KiCad Library to make it easy to create both host boards and expansion boards and which are compatible with the Digilent "PMOD" specifica…
  ☆40Updated 4 years ago
• no2fpga / no2usb
  Nitro USB FPGA core
  ☆87Updated last year
• pergola-fpga / pergola
  Low-cost ECP5 FPGA development board
  ☆77Updated 4 years ago