Alternatives and similar repositories for LicheeTang_openocd

Users that are interested in LicheeTang_openocd are comparing it to the libraries listed below

• VladimirDuan / CH55x-USB-Blaster
  USB-Blaster instance on CH55x MCU.
  ☆50Updated 6 years ago
• Lichee-Pi / Tang_Doc_Backup
  Lichee Tang - A circuit board of RISC-V architecture http://tang.lichee.pro
  ☆18Updated 6 years ago
• rgwan / open-ec
  Opensource embedded controller firmware for sipeed boards.
  ☆40Updated 6 years ago
• sipeed / open-ec
  Opensource embedded controller firmware for sipeed boards.
  ☆14Updated 6 years ago
• metro94 / RV-DAP-Plus
  ☆25Updated 3 years ago
• riscv-mcu / GD32VF103_DataSheets
  The directory to save GD32VF103 DataSheets
  ☆19Updated 4 years ago
• strongwong / arduino-bl618
  Arduino core for the BL618
  ☆18Updated last year
• ATmega8 / kiterf
  Release KiteRF is a SDR system with K210 & FPGA & ESP32 as its core controller, which make SDR more intelligent, portable and cheap.
  ☆25Updated 5 years ago
• SoCXin / CH569
  L2 R6: WCH 120MHz RISC-V3A USB3.0 SoC (CH569)
  ☆16Updated 2 years ago
• kangyuzhe666 / zynq7010-pynq-2.5
  蚂蚁S9矿板移植pynq2.5
  ☆29Updated 4 years ago
• MrJBSwe / fft_lcd
  fft - kendryte k210 / Sipeed M1 dock
  ☆32Updated 6 years ago
• diodep / ch55x_dualserial
  CH552 Dual USB to Serial Bridge.
  ☆78Updated 11 months ago
• damien-lemoal / riscv64-nommu-buildroot
  ☆43Updated 4 years ago
• hansfbaier / ch569-usb3-board
  USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569
  ☆26Updated 2 years ago
• riscv-mcu / GD32VF103_Boards_Doc
  The directory to save the GD32VF103 relevant Boards' documents
  ☆15Updated 4 years ago
• wuhanstudio / hbird_e203_tang
  A 32bit RISC-V SoC on FPGA (EG4S20) that supports RT-Thread.
  ☆12Updated 4 years ago
• xjtuecho / AgmPill
  A low cost FPGA/CPLD dev-board based on AG1280Q48.
  ☆67Updated last month
• kendryte / openocd-kendryte
  ☆24Updated 6 years ago
• Icenowy / USB-Blaster-GCC
  Port of https://github.com/eleqian/WiDSO/tree/master/MCU/USB-Blaster to GCC and "traditional" STM32F103C8T6 Bluepill board.
  ☆42Updated 6 years ago
• Lichee-Pi / anlogic-usbjtag
  Binary blob for Anlogic USB-JTAG adapter (temporary), We should figure out much better solution next year.
  ☆18Updated 6 years ago
• Leungfung / ebaz4205_hw
  ☆78Updated 6 years ago
• sipeed / Tang-Hex-BSP
  Tang-Hex-BSP: BSP for ZYNQ 7020 based FPGA Board Tang-Hex
  ☆13Updated 6 years ago
• HonghongLu / CH554
  8051 microcontroller
  ☆40Updated 7 years ago
• deanm1278 / FPGA_SWD
  fpga co-processor for faster SWD programming
  ☆17Updated 7 years ago
• ultraembedded / usb2sniffer
  USB2Sniffer: High Speed USB 2.0 capture (for LambdaConcept USB2Sniffer hardware)
  ☆55Updated 5 years ago
• SoCXin / RDA8810
  L4：Cortex A5 GSM SoC RDA8810
  ☆25Updated 6 years ago
• gtortone / esp-xvcd
  ESP8266 Xilinx Virtual Cable - wifi JTAG
  ☆39Updated 4 years ago
• Postlast / USB-Blaster_STM32f1
  The program for USB-Blaster Chinese version on STM32 works with
  ☆32Updated 7 years ago
• verilog-indeed / nano_4k_empu
  Reference FPGA designs for interfacing with the internal ARM Cortex M3 MCU of the GW1NSR-4C, modified for use with boards like the Tang N…
  ☆11Updated 2 years ago
• trebisky / ebaz4205_miner
  Bare metal programming on the EBAZ4205 board with Zynq XC7Z010 SoC
  ☆18Updated 7 months ago