ATmega8 / kiterfLinks
Release KiteRF is a SDR system with K210 & FPGA & ESP32 as its core controller, which make SDR more intelligent, portable and cheap.
☆25Updated 5 years ago
Alternatives and similar repositories for kiterf
Users that are interested in kiterf are comparing it to the libraries listed below
Sorting:
- Opensource embedded controller firmware for sipeed boards.☆39Updated 6 years ago
- USB-Blaster instance on CH55x MCU.☆49Updated 5 years ago
- ☆25Updated 3 years ago
- Read only mirror of SVN ChibiOS repository. Official forum http://forum.chibios.org Bugtracker http://sourceforge.net/projects/chibios☆16Updated 5 years ago
- Bare metal programming on the EBAZ4205 board with Zynq XC7Z010 SoC☆18Updated 6 months ago
- FTDI EEPROM User Area Writer For Xilinx JTAG Programmer☆12Updated 11 years ago
- ESP8266 Xilinx Virtual Cable - wifi JTAG☆39Updated 4 years ago
- USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569☆26Updated 2 years ago
- WCH CH569 SerDes Reverse Engineering☆26Updated 2 years ago
- Reference FPGA designs for interfacing with the internal ARM Cortex M3 MCU of the GW1NSR-4C, modified for use with boards like the Tang N…☆11Updated 2 years ago
- Winnermicro W60x Wi-Fi library reverse engineering notes & hackings☆18Updated 4 years ago
- Standalone SDR experiment using multicore MCU - FM version☆16Updated 7 years ago
- Firmware for the FX2 which emulates the FTDI serial chips (including MPSSE support).☆14Updated 6 years ago
- Port of https://github.com/eleqian/WiDSO/tree/master/MCU/USB-Blaster to GCC and "traditional" STM32F103C8T6 Bluepill board.☆42Updated 6 years ago
- USB-JTAG Adapter Using CH552☆69Updated 3 years ago
- Load bitstream to AG1K series FPGA using CH552☆12Updated 3 years ago
- 蚂 蚁S9矿板移植pynq2.5☆28Updated 4 years ago
- SDK sch&layout reference design and datasheet documention☆62Updated last year
- Wi-Fi enabled XVC programmer/debugger based on ESP8266☆12Updated 10 years ago
- FT2232HL JTAG & UART Downloader☆15Updated 3 years ago
- xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters …☆18Updated 5 years ago
- The program for USB-Blaster Chinese version on STM32 works with☆31Updated 7 years ago
- fpga co-processor for faster SWD programming☆17Updated 7 years ago
- A far more light version anlogic-jtag cable with some enhanced functions.☆49Updated 9 months ago
- STM32: example of usage of R820T2 tuner☆16Updated 6 years ago
- 🔌 Compact JTAG ("cJTAG") to 4-wire JTAG (IEEE 1149.1) bridge.☆24Updated 3 years ago
- PCIe adapter for an FPGA accelerator for Open CloudServer☆23Updated 5 years ago
- L2 R6: WCH 120MHz RISC-V3A USB3.0 SoC (CH569)☆16Updated 2 years ago
- Vector Network Analyzer 10 KHz - 180 MHz☆25Updated 6 years ago
- It started as some general experiments with RF stuff and gradually evolved into a (severely limited) spectrum analyzer.☆42Updated 6 years ago