Brezensalzer / StepperBotLidar2Links
Rotating 360 degree Lidar based on the TF Mini sensor. Arduino Code for Bluepill Board. Openscad, FreeCAD drawings and STL files.
☆20Updated 7 years ago
Alternatives and similar repositories for StepperBotLidar2
Users that are interested in StepperBotLidar2 are comparing it to the libraries listed below
Sorting:
- Arduino code to control a quadruped robot☆9Updated 8 years ago
- Micro Robot Arm with ESP32 and 28BY-48 12V steppers☆82Updated 5 years ago
- A 3D printed balancing robot☆73Updated 8 years ago
- Simple ESP32-Arduino library to operate LX-16A serial servos☆24Updated last year
- Firmware for Replicape☆36Updated 2 years ago
- Arduino library supports many HC-SR04 sensors via I2C bus and hardware interrupt☆26Updated 8 years ago
- Hacking of the Neato XV-11 lidar☆84Updated 5 years ago
- Project aiming to transform regular hobby servos into smart ones by replacing their original boards.☆22Updated 9 years ago
- Arduino modular snake robots library. Generate the locomotion of snake robots easily!☆44Updated 9 years ago
- Code and STL files for small 18 servo hexapod.☆30Updated last year
- Affordable and open-source LIDAR based on three VL53L0X ranging sensor.☆68Updated 7 years ago
- This repository contains the code, 3D-printable files and electronics to make my 3D Lidar.☆74Updated last year
- ☆73Updated last year
- Classes for control of a differential drive robot using PID control of DC motors☆48Updated 8 years ago
- uStepper Robot Arm STL files and instruction Revision 3☆92Updated 7 years ago
- Embedded firmware and web user interface for self balancing telepresence robot☆31Updated 7 years ago
- Use Hoverboards to add motor drives to assistive devices.☆18Updated 4 years ago
- STL and STEP files for Emlid devices and additional accessories☆48Updated 5 years ago
- MicroPede robot controller 🤖🖥👾☆100Updated 5 years ago
- Arduino library for the management of rotary encoders with STM32☆26Updated last year
- Arduino Library to control R/C ESC's☆64Updated last year
- An Arduino driver for the Benewake TFMini time-of-flight distance sensor☆37Updated 2 years ago
- OpenServo Version 4☆21Updated 12 years ago
- G-code enabled firmware for Robot Arms☆33Updated 3 years ago
- An open-source DIY 4 Axis Foam cutter using Ramps + Arduino for cutting RC Wing Cores.☆88Updated 3 years ago
- A simple PID library for Arduino☆47Updated 3 years ago
- Arduino library for the Benewake TFLuna LiDAR distance sensor in the I2C communication mode☆33Updated last year
- ☆34Updated 3 years ago
- XDisplace are a complete solution to mill, dispense solder paste and pixk and place components to a pcb in one process!☆12Updated 8 years ago
- PID for Hoverboard motor with ZS-X11H controller☆26Updated last year