Alternatives and similar repositories for ThisArm_Firmware

Users that are interested in ThisArm_Firmware are comparing it to the libraries listed below

• uStepper / uStepper-RobotArm-Rev3
  uStepper Robot Arm STL files and instruction Revision 3
  ☆94Updated 7 years ago
• T-Kuhn / ESP32-MicroRobotArm
  Micro Robot Arm with ESP32 and 28BY-48 12V steppers
  ☆82Updated 6 years ago
• neuroprod / ClosedLoopDriver
  Arduino controler for a closed-loop stepper motor
  ☆88Updated 10 years ago
• uStepper / uStepper
  Repository for uStepper
  ☆100Updated 5 years ago
• ftobler / robotArm
  Software for a 3D Printed Robot Arm
  ☆134Updated 2 months ago
• MarginallyClever / Delta-Robot
  Hobby scale for teaching basic robot concepts
  ☆37Updated 10 years ago
• fra589 / cn5X
  cn5X++ is a new 5/6 axis Grbl control panel to implement all the grbl-Mega-5X capabilities.
  ☆81Updated last year
• bikerglen / robot-arm-v01
  ☆58Updated 7 years ago
• ttsalo / Marlin-SCARA
  Modified Marlin for parallel SCARA printers.
  ☆22Updated 12 years ago
• uStepper / uStepperS
  ☆54Updated last year
• isaac879 / Delta-Robot
  This repository is for my 3D printed delta robot controlled by an Arduino Nano.
  ☆48Updated 5 years ago
• ottoragam / Brushed-DC-Servo-Drive
  Low cost servo drive for small CNC machinery
  ☆54Updated 8 years ago
• Chris-Annin / Annin-Robot-Project
  6 axis stepper motor robot
  ☆111Updated 7 years ago
• MarginallyClever / GcodeCNCDemo
  a simple example of making a CNC machine from an Adafruit Motor Shield
  ☆217Updated last year
• beardface / Marlin-OpenSL
  Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu
  ☆16Updated 12 years ago
• SourceRabbit / gcode-sender
  Cross platform 3-Axis CNC Machines control software
  ☆82Updated 10 months ago
• BCN3D / BCN3DSigma-Electronics
  6 Axis Open Source Electronics for BCN3D Sigma 3D Printer.
  ☆55Updated 3 years ago
• evezor / Cartesian-to-SCARA-Converter
  This script will convert gcode from cartesian space to SCARA space
  ☆30Updated 8 years ago
• imrahil / smoothieware-webui
  Better webUI for Smoothieware
  ☆22Updated 8 years ago
• maxosprojects / dobot-arm-CAD
  dobot-arm CAD files
  ☆65Updated 9 years ago
• misan / dcservo
  Position control of DC motors
  ☆327Updated 8 months ago
• uStepper / Robot-Arm-Rev-4
  STL files and instructions for uStepper Robot Arm Rev 4
  ☆70Updated 4 years ago
• NiryoRobotics / niryo_stepper
  ☆49Updated 7 years ago
• im-pro-at / cncgcodecontroller
  CNC-GCode-Controller
  ☆150Updated 2 years ago
• T-Kuhn / DeltaPicker
  The Raspberry Pi & Arduino files for the DeltaPicker
  ☆20Updated 6 years ago
• cncgoko / Goko
  A desktop application for CNC milling controller running TinyG or Grbl
  ☆73Updated 6 years ago
• gnea / grbl-LPC
  ☆76Updated 3 years ago
• dewy721 / EMC-2-Arduino
  Arduino + LinuxCNC = Your very own FREE high-end CNC controller.
  ☆118Updated 4 years ago
• teemuatlut / TMC2208Stepper
  ☆73Updated 5 years ago
• bkubicek / QTMarlin
  QT Marlin setting configuration tool
  ☆77Updated 8 years ago