oracid / PID-for-Hoverboard-motor-with-ZS-X11H-controller
PID for Hoverboard motor with ZS-X11H controller
☆20Updated last year
Alternatives and similar repositories for PID-for-Hoverboard-motor-with-ZS-X11H-controller:
Users that are interested in PID-for-Hoverboard-motor-with-ZS-X11H-controller are comparing it to the libraries listed below
- Use Hoverboards to add motor drives to assistive devices.☆18Updated 3 years ago
- better UART communication (bi-directional) and km/h speed control☆24Updated 3 years ago
- With Field Oriented Control (FOC)☆47Updated 2 years ago
- with different defines_2-x.h for different board layouts :-) Compiles with Keil version 6☆96Updated last month
- ☆39Updated 4 months ago
- Radio control of the RC using the ESP-NOW protocol.☆17Updated last month
- Generic Motor Controller Interface for Hover-1 Dual controllers☆26Updated 3 years ago
- ☆19Updated last month
- CHEAP LAWNMOWER ROBOT USING A HOVERBOARD (Hacked Firmware)☆24Updated 3 years ago
- Hoverboard Hack Firmware Generation 2 for the Hoverboard with the two Mainboards instead of the Sensorboards (See Readme.md).☆164Updated 3 years ago
- ROS hardware driver for UART-controlled hoverboard☆106Updated 9 months ago
- Arduino LiDAR library supporting YDLIDAR X2/X3/X4, RPLIDAR A1, Xiaomi LDS02RR, Neato XV11, LD14P, CAMSENSE X1, Delta-2A/2B/2G☆105Updated last week
- Self-balancing robot using hoverboard hub motors☆22Updated 2 years ago
- This software will run the ADC variant with added PID closed loop control of the motors.☆25Updated 4 years ago
- ROS project for Robaka - mobile ROS testbed☆75Updated 2 years ago
- ☆12Updated last year
- Mahowii is pretty stable, improved and extended version of Multiwii.☆28Updated 8 months ago
- ☆33Updated 3 years ago
- ☆33Updated 2 years ago
- ☆45Updated 6 years ago
- Obsolete repository, moved to bipropellant project☆63Updated 5 years ago
- ☆19Updated 2 years ago
- Simple Arduino library to operate LX-16A, LX-224 and LX-15D serial servos☆61Updated last year
- This is a ROS 2 & Micro-ROS project to control an RC tank with differential drive (skid steering) with an ESP32-CAM module.☆68Updated last year
- ☆24Updated last year
- ☆58Updated last week
- Maker's Pet Loki - a 200mm 3D-printed DIY pet robot compatible with Kaia.ai robotics software platform☆42Updated 2 months ago
- Arduino library to control brushed DC motors by PWM. Uses optional attached encoders to drive fixed distances.☆45Updated 2 months ago
- BLDC_Hover_Board_Motor_Controller☆25Updated 6 years ago
- Remote control library based on ESP-NOW (PlatformIO, ESP32 and ESP8266)☆84Updated 4 months ago