Alternatives and similar repositories for open-plc-utils

Users that are interested in open-plc-utils are comparing it to the libraries listed below

• SwitchEV / RISE-V2G
  The only fully-featured reference implementation of the Vehicle-2-Grid communication interface ISO 15118
  ☆236Updated 2 years ago
• ChargePoint / wireshark-v2g
  Dissector for the V2G Protocols
  ☆56Updated last month
• ffainelli / faifa
  Faifa can configure any Intellon-based Power Line Communication device using Intellon INT5000 and INT6000 series chips (6000 and 6300 chi…
  ☆63Updated 4 years ago
• dspace-group / dsV2Gshark
  Free Wireshark plugin to analyze ISO15118 V2G communication between electric vehicles (EV) and charging stations (EVSE).
  ☆62Updated 3 weeks ago
• EcoG-io / iso15118
  Implementation of the ISO 15118 Communication Protocol (-2, -20, -8)
  ☆224Updated this week
• Martin-P / OpenV2G
  An open source project implementing the basic functionality of the ISO IEC 15118 and also the DIN 70121 vehicle to grid (V2G) communicati…
  ☆109Updated 3 years ago
• cblach / nikola-v2gstack
  ☆22Updated 10 years ago
• FlUxIuS / V2Gdecoder
  V2Gdecoder: encode and decode V2G messages on the fly
  ☆42Updated 3 years ago
• qca / qca7000
  UART/SPI drivers for Qualcomm Atheros QCA7000 serial-to-powerline bridge chip. This version is specific to Linux 2.6.35 and Freescale iMX…
  ☆61Updated 12 years ago
• EVerest / cbexigen
  cbExiGen - The V2GTP EXI codec generator for cbV2G
  ☆50Updated 7 months ago
• EcoG-io / josev
  The community version of Josev - An Operating System for the V2G charging Stations
  ☆145Updated last year
• uhi22 / pyPLC
  Electric vehicle CCS charging investigations with Python
  ☆201Updated 2 months ago
• boundarydevices / imx_usb_loader
  USB & UART loader for i.MX5/6/7/8 series
  ☆271Updated last year
• snarlistic / jpnevulator
  jpnevulator is a handy serial sniffer. You can use it to send data on a serial device too. You can read or write from/to one or more seri…
  ☆122Updated 3 years ago
• EDF-Lab / eVDriveFlow
  EDF R&D implementation of ISO 15118-20.
  ☆63Updated 2 years ago
• EcoG-io / pyslac
  Implementation of the Signal Level Attenuation Characterisation (SLAC) introduced in ISO15118-3
  ☆47Updated 2 years ago
• EVerest / everest-core
  ☆139Updated this week
• rscada / libmbus
  Meter-bus library and utility programs
  ☆245Updated 8 months ago
• 3cky / mbusd
  Open-source Modbus TCP to Modbus RTU (RS-232/485) gateway.
  ☆621Updated 8 months ago
• FlUxIuS / V2GInjector
  V2GInjector - Tool to intrude a V2G PowerLine network, but also to capture and inject V2G packets
  ☆138Updated 9 months ago
• niclash / zboss
  ZigBee Open Source Stack, v1.0 from DSR Wireless in case they take it down.
  ☆46Updated 11 years ago
• epsilonrt / mbpoll
  command line utility to communicate with ModBus slave (RTU or TCP)
  ☆355Updated 3 months ago
• Sevenstax / FreeV2G
  Python based Host MPU Application for the use with 8DEVICES WHITE-BEET Embedded ISO15118 Module modules to realize IEC/ISO15118 and DIN70…
  ☆63Updated 11 months ago
• EVerest / libocpp
  C++ implementation of the Open Charge Point Protocol
  ☆129Updated this week
• PionixPublic / reference-hardware
  BelayBox reference hardware
  ☆57Updated last year
• EVerest / libcbv2g
  libcbV2G - The V2GTP EXI codec library
  ☆25Updated 5 months ago
• dschanoeh / socketcand
  A deprecated fork of socketcand. Please got to linux-can for the latest version.
  ☆130Updated 6 years ago
• hubject / opcp
  Open Plug'n Charge Protocol
  ☆68Updated 5 months ago
• EVerest / libiso15118
  ISO 15118 library suite
  ☆24Updated last week
• openxc / vi-firmware
  OpenXC-compatible firmware for PIC32 and LPC1768
  ☆205Updated 2 years ago