Alternatives and similar repositories for ODrive-Python-GUI

Users that are interested in ODrive-Python-GUI are comparing it to the libraries listed below

• jkirsons / stealth-controller
  ☆91Updated 4 years ago
• RoboDurden / Hoverboard-Firmware-Hack-Gen2.x
  with different defines_2-x.h for different board layouts :-) Compiles with Keil version 6
  ☆131Updated 3 weeks ago
• makerbase-mks / ODrive-MKS
  ☆66Updated 2 years ago
• KoshiroRobot / Ball-Balancing-Robot
  Ball Balance Robot Parts File and Program
  ☆218Updated last year
• KoshiroRobot / Robotic-Actuator-and-ESC
  ☆101Updated 9 months ago
• makerbase-mks / MKS-DUALFOC
  ☆26Updated 3 years ago
• aaedmusa / TOPS
  TOPS (Traverser of Planar Surfaces) or "SPOT" backwards is a 3D printed Open Source quadrupedal robot
  ☆284Updated 2 years ago
• craigg96 / vesc_can_bus_arduino
  This repo contains the CAN bus protocol for VESC that can be used with arduino and the MCP2515 driver library
  ☆46Updated 3 months ago
• hoverboard-robotics / hoverboard-firmware-hack-FOC
  With Field Oriented Control (FOC)
  ☆56Updated 2 years ago
• oracid / PID-for-Hoverboard-motor-with-ZS-X11H-controller
  PID for Hoverboard motor with ZS-X11H controller
  ☆34Updated last year
• JeongSeoJin / robotic-actuators
  ☆72Updated 2 months ago
• byDagor / Dagor-Brushless-Controller
  The Dagor Controller is a fully integrated tiny solution for brushless-based actuators with wireless capabilities.
  ☆373Updated 6 months ago
• flo199213 / Hoverboard-Firmware-Hack-Gen2
  Hoverboard Hack Firmware Generation 2 for the Hoverboard with the two Mainboards instead of the Sensorboards (See Readme.md).
  ☆181Updated 4 years ago
• JackDemeter / quadruped-robot
  Quadruped Robot for capstone project
  ☆57Updated 3 years ago
• aaedmusa / OpenQDD-V1
  Open source 3D printed Robotic Actuator
  ☆100Updated 2 years ago
• AustinOwens / odrive_config
  Config scripts for configuring the BLDC ODrive Motor Controller
  ☆10Updated last year
• NikodemBartnik / Overpowered-Robotic-Chassis
  Scripts for controlling AK actuators from T-motor (or similar motors) and a simple modular chassis
  ☆34Updated 2 years ago
• hoverboard-robotics / hoverboard-driver
  ROS hardware driver for UART-controlled hoverboard
  ☆126Updated last month
• aaedmusa / Internal-Cycloidal-Actuator
  ☆250Updated last year
• dsuarezv / GearSolver
  A cycloid gear graphical calculator to design cycloidal drives.
  ☆131Updated 4 years ago
• Tomato1107 / Cycloidal-Drive-Animation
  Based on matplotlib
  ☆76Updated 6 months ago
• zauberzeug / odrive-gui
  GUI to configure the ODrive Motor Controller
  ☆43Updated 2 years ago
• XRobots / CycloidalDrive
  ☆211Updated last year
• ongdexter / ar3_core
  Core software with ROS and MoveIt for the AR3 robotic arm
  ☆120Updated 4 years ago
• makerbase-motor / MKS-ESP32FOC
  ☆67Updated last year
• naoanya / bldc
  ☆20Updated 11 months ago
• Arctos-Robotics / ROS
  ROS files for Arctos 3D printed robotic arm
  ☆90Updated last year
• byDagor / Janus-Controller
  The Janus Controller is a Brushless motor driver with an on-board magnetic encoder, a three-phase MOSFET driver, three MOSFET half-bridge…
  ☆132Updated 5 years ago
• CoyBeard / KUKA-KR350-Scale-Model
  One forth scale model of the KUKA KR350 model 3D printed and Arduino controlled.
  ☆51Updated 3 years ago
• simplefoc / Arduino-FOC-balancer
  Modular Arduino two wheel balancing robot based on gimbal BLDC motors and simplefoc library
  ☆247Updated last year