sparkfun / SparkFun_RTK_Firmware
Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
☆91Updated last month
Alternatives and similar repositories for SparkFun_RTK_Firmware:
Users that are interested in SparkFun_RTK_Firmware are comparing it to the libraries listed below
- The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.☆20Updated 5 months ago
- Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup☆57Updated last year
- A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …☆33Updated 5 years ago
- Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, RTCM3, NTRIP and SPARTN protocols☆100Updated last week
- A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.☆52Updated last year
- A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.☆23Updated 8 months ago
- mosaicHAT+ GNSS antenna + Raspberry Pi + Touch display + Battery + Case☆31Updated 4 years ago
- Mosaichat: an open source Raspberry Pi HAT based on Septentrio's mosaic-X5☆50Updated 8 months ago
- Docker file and instructions to build and run the BKG NTRIP caster☆102Updated 7 months ago
- Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB☆93Updated 6 years ago
- Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.☆28Updated last week
- Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.☆89Updated 4 years ago
- ☆60Updated 4 years ago
- Useful code to work with Ardusimple simpleRTK2B application board☆37Updated 3 years ago
- GNSS Base Station based on Raspberry Pi 4B☆40Updated last year
- An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface☆65Updated 4 months ago
- Real time kinematics base station (ESP32 + ZED-F9P)☆32Updated 2 years ago
- Python library for the UBX protocol☆38Updated 4 years ago
- The OpenLog Artemis GNSS Logger makes logging raw UBX messages as easy as controlling text menus! This is a special add-on to the OpenLog…☆13Updated 5 months ago
- Contains program to Send RTCM3 📡 data to Hosted NTRIP server and fetch NTRIP data and display on another rover. Real time kinematic supp…☆28Updated 2 years ago
- Reach-hosted web-interface for RTKLIB☆59Updated 5 years ago
- RTK-GPS/GNSS guidance for agriculture tractor by python code☆16Updated 3 years ago
- Modified from ntripcaster 0.1.5, Fixed the socket length compiling error.☆25Updated 10 years ago
- fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images☆19Updated 5 months ago
- A clone of the Adafruit GPS FeatherWing incorporating the u-blox NEO-M8T (external antenna). Designed to work with the Adafruit Feather M…☆34Updated 5 years ago
- AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)☆38Updated 6 years ago
- Emlid's fork of Tomoji Takasu's RTKLIB used in Reach RTK receiver☆75Updated 3 years ago
- ☆53Updated 5 years ago
- Python library for parsing and generating NMEA 0183 GNSS/GPS protocol messages.☆88Updated this week
- ESP32 XBee UART Interface☆96Updated 2 years ago