Alternatives and similar repositories for TouchRTKStation

Users that are interested in TouchRTKStation are comparing it to the libraries listed below

• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆60Updated last year
• Francklin2 / RTKLIB_Touchscreen_GUI
  RTKLIB GUI for Raspberry Pi with touchscreen made with Qt by the ENSG students
  ☆181Updated 6 years ago
• u-blox / ublox-C099_F9P-uCS
  ☆60Updated 5 years ago
• emlid / RTKLIB
  Emlid's fork of Tomoji Takasu's RTKLIB used in Reach RTK receiver
  ☆77Updated 4 years ago
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆114Updated 10 months ago
• sparkfun / Qwiic_GPS-RTK2
  A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.
  ☆54Updated 2 years ago
• nunojpg / rtcm3torinex
  Real-time converter from NTRIP streamed RTCM3 data to RINEX
  ☆61Updated 10 years ago
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 3 years ago
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, SBF, RTCM3, NTRIP and SPARTN protocols
  ☆111Updated this week
• semuconsulting / pyrtcm
  Python library for parsing RTCM 3 protocol messages.
  ☆92Updated last month
• baidu / ntripcaster
  ☆46Updated 7 years ago
• DoubleString / VrsCaster
  Caster based on rtklib 2.4.3,including self-defined vrs mode
  ☆20Updated 5 years ago
• taroz / GNSS-Radar
  GNSS-Radar is a web application to show the current GNSS constellation
  ☆93Updated 10 years ago
• tridge / pyUblox
  python Ublox module
  ☆105Updated 2 years ago
• rtklibexplorer / rtklib-py
  Python implementation of RTKLIB. Based on demo5 version. Currently only supports PPK solutions
  ☆202Updated last year
• Aceinna / ublox_decoder
  Decode Ublox M8L data
  ☆33Updated 4 years ago
• tyler123durden / rtklib
  RTKLIB modifications for embedded systems
  ☆18Updated 12 years ago
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• nunojpg / ntripserver
  Ntrip Version 2.0 Command Line Server
  ☆69Updated 10 years ago
• septentrio-gnss / mosaicHAT
  Mosaichat: an open source Raspberry Pi HAT based on Septentrio's mosaic-X5
  ☆55Updated last year
• jcmb / RTCM3
  System for Parseing RTCM3.x packets
  ☆45Updated 5 years ago
• Erensu / cors
  Continuously Operating Reference Stations (CORS), provide network RTK differential service.
  ☆27Updated last month
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆90Updated 4 years ago
• ruffsl / RTKLIB-Tools
  Tools for RTKLIB
  ☆29Updated 11 years ago
• goblimey / c-ntripserver
  BKG's reference NTRIP server with some useful tweaks
  ☆12Updated 5 years ago
• jcmb / NTRIP
  NTRIP, VRS, IBSS Tools
  ☆44Updated 2 weeks ago
• illarionov / RtkGps
  Playing with rtklib on android
  ☆147Updated 3 years ago
• Node-NTRIP / rtcm
  Decoder/encoder for all RTCM 3 message types up to RTCM 3.3 Amendment 1 (c10403.3).
  ☆45Updated 2 years ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆96Updated this week
• SGL-UT / gnsstk
  The goal of the gnsstk project is to provide an open source library to the satellite navigation community--to free researchers to focus o…
  ☆145Updated 2 weeks ago