sparkfun / SparkFun_RTK_Everywhere_FirmwareLinks
Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
☆48Updated this week
Alternatives and similar repositories for SparkFun_RTK_Everywhere_Firmware
Users that are interested in SparkFun_RTK_Everywhere_Firmware are comparing it to the libraries listed below
Sorting:
- Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.☆102Updated last month
- Modified from ntripcaster 0.1.5, Fixed the socket length compiling error.☆26Updated 11 years ago
- GNSS Base Station based on Raspberry Pi 4B☆50Updated 2 years ago
- fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images☆24Updated last year
- Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup☆61Updated last year
- Mosaichat: an open source Raspberry Pi HAT based on Septentrio's mosaic-X5☆56Updated last year
- A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.☆60Updated 2 years ago
- ☆15Updated 3 years ago
- The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.☆21Updated last year
- Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, SBF, QGC, RTCM3, NTRIP and SPARTN protocols☆130Updated 3 weeks ago
- Raspbian compatible RtkBase software for Unicore UM98x, Bynav M2x and Septentrio Mosaic X5☆62Updated this week
- NUT2NT+ hardware and gateware sources☆26Updated 5 years ago
- ☆14Updated 9 months ago
- STM32 based SDR GPS receiver☆90Updated 9 months ago
- Software GPS receiver for ESP32☆51Updated last year
- mosaicHAT+ GNSS antenna + Raspberry Pi + Touch display + Battery + Case☆32Updated 4 years ago
- Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.☆90Updated 4 years ago
- The datasheets and documentation for the centimeter level RTK Torch GNSS receiver with built in tilt compensation.☆11Updated 10 months ago
- Real time kinematics base station (ESP32 + ZED-F9P)☆42Updated 3 years ago
- An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface☆95Updated 2 weeks ago
- A clone of the Adafruit GPS FeatherWing incorporating the u-blox NEO-M8T (external antenna). Designed to work with the Adafruit Feather M…☆35Updated 6 years ago
- The Millipede NTRIP/RTK caster☆31Updated this week
- multi MAX2771 GNSS receiver☆50Updated last week
- A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …☆34Updated 5 years ago
- Software, scripts and data relating to GNSS/GPS Real Time/Post-Processed Kinematic sat nav☆31Updated 6 months ago
- Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB☆98Updated 6 years ago
- Release of PocketSDR NEO* edition schematics, PCB, and BOM in KICAD 7.0 format.☆13Updated last year
- Docker file and instructions to build and run the BKG NTRIP caster☆124Updated last year
- ☆13Updated last year
- UM982 specific AgOpenGPS Firmware☆14Updated 7 months ago