Alternatives and similar repositories for open-rtk

Users that are interested in open-rtk are comparing it to the libraries listed below

• sparkfun / SparkFun_RTK_Facet
  The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.
  ☆20Updated 7 months ago
• fguiet / gnss-rtk
  My own RTK network
  ☆24Updated last year
• vasimv / rtkzedf9p
  Simple utility to enable internal RTK mode in Ublox ZED-F9P GPS receiver with RTKLIB-compatible output
  ☆14Updated 5 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆60Updated last year
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆94Updated 6 years ago
• Archfx / RTK-NTRIP-RTCM
  Contains program to Send RTCM3 📡 data to Hosted NTRIP server and fetch NTRIP data and display on another rover. Real time kinematic supp…
  ☆28Updated 2 years ago
• mnltake / gpsnavi
  RTK-GPS/GNSS guidance for agriculture tractor by python code
  ☆16Updated 3 years ago
• slgrobotics / Esp32_RTK_BaseStation
  Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster
  ☆31Updated 2 years ago
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆23Updated 10 months ago
• emlid / ntripbrowser
  CLI tool to easily get NTRIP caster information
  ☆33Updated 2 years ago
• mkameke / ZED-F9P_Raw_Data_Logger
  A raw data logger based on the u-blox ZED-F9P GNSS receiver intended for use with Precise Point Positioning (PPP) and Post-Processed Kine…
  ☆11Updated 5 years ago
• tyler123durden / rtklib
  RTKLIB modifications for embedded systems
  ☆17Updated 12 years ago
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• osqzss / PocketSDR
  ☆12Updated last month
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 3 years ago
• acsgn95 / PELLICANUS
  ☆12Updated 3 years ago
• paparazzi / PprzGCS
  GCS for PaparazziUAV
  ☆16Updated last week
• sparkfun / Qwiic_GPS-RTK2
  A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.
  ☆54Updated 2 years ago
• septentrio-gnss / uBloxCorrectionsWithSeptentrio
  ☆12Updated 6 months ago
• Nerolf05 / gnss-nav-py
  Decoder for GNSS Navigation messages
  ☆7Updated 2 years ago
• easyrtk / cors_compare
  ☆12Updated 3 years ago
• tomojitakasu / SCH63T_MINI_EVK
  ☆22Updated 3 years ago
• jdesbonnet / GNSS_RTK
  Software, scripts and data relating to GNSS/GPS Real Time/Post-Processed Kinematic sat nav
  ☆26Updated 4 months ago
• ARK-Electronics / ARK_RTK_GPS
  Open source UAVCAN RTK GPS, F9P, magnetometer, barometer, IMU, buzzer, and safety switch module.
  ☆11Updated 2 years ago
• stenseng / ntripstreams
  NtripStreams provide communication methods for the NTRIP protocol.
  ☆14Updated 10 months ago
• rokubun / gnss_tools
  Docker that encapsulates various GNSS processing tools
  ☆20Updated 3 years ago
• Coffeetrac / AG_NTRIP_ESP
  AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)
  ☆39Updated 6 years ago
• dusk0r / EasyNtrip
  EasyNtrip NTRIP Server
  ☆16Updated 7 years ago
• stephendade / apsync-Kakute
  Companion Computer software installer for the KakutePi board and APM
  ☆23Updated 5 years ago
• PaulZC / NEO-M8T_GNSS_FeatherWing
  A clone of the Adafruit GPS FeatherWing incorporating the u-blox NEO-M8T (external antenna). Designed to work with the Adafruit Feather M…
  ☆35Updated 5 years ago