Alternatives and similar repositories for rtkbase

Users that are interested in rtkbase are comparing it to the libraries listed below

• semuconsulting / PyGPSClient
  Python Graphical GPS Client Application supporting NMEA, UBX, SBF, QGC, RTCM3, NTRIP & SPARTN Protocols
  ☆767Updated last week
• rtklibexplorer / RTKLIB
  A version of RTKLIB optimized for low cost GNSS receivers, especially u-blox receivers. It is based on RTKLIB 2.4.3. This software is p…
  ☆872Updated last week
• GNSSOEM / ELT_RTKBase
  Raspbian compatible RtkBase software for Unicore UM98x, Bynav M2x and Septentrio Mosaic X5
  ☆62Updated this week
• semuconsulting / pyubx2
  Python library for parsing and generating UBX GPS/GNSS protocol messages.
  ☆243Updated 2 months ago
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆126Updated last year
• eringerli / RpiNtripBase
  ☆51Updated 5 years ago
• GormR / HW_for_AgOpenGPS
  Autosteering and RTK-GNSS units for AgOpenGPS / QtOpenGuidance
  ☆67Updated 3 years ago
• tomojitakasu / RTKLIB_bin
  ☆373Updated 2 years ago
• Francklin2 / RTKLIB_Touchscreen_GUI
  RTKLIB GUI for Raspberry Pi with touchscreen made with Qt by the ENSG students
  ☆188Updated 6 years ago
• barbeau / awesome-gnss
  Community list of open-source GNSS software and resources
  ☆531Updated 4 months ago
• AgOpenGPS-Official / AgOpenGPS
  Ag Precision Mapping, Section Control and Guidance Software
  ☆840Updated this week
• rtklibexplorer / rtklib-py
  Python implementation of RTKLIB. Based on demo5 version. Currently only supports PPK solutions
  ☆228Updated 2 years ago
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, SBF, QGC, RTCM3, NTRIP and SPARTN protocols
  ☆133Updated last month
• jacobjhansen / RTCM-Pi
  GNSS Base Station based on Raspberry Pi 4B
  ☆51Updated 2 years ago
• nunojpg / ntripserver
  Ntrip Version 2.0 Command Line Server
  ☆72Updated 10 years ago
• semuconsulting / pyrtcm
  Python library for parsing RTCM 3 protocol messages.
  ☆107Updated 2 months ago
• lansalot / FreeRTK
  How to set up your own RTK base station
  ☆45Updated 2 years ago
• Node-NTRIP / caster
  Node.js NTRIP caster library with full NTRIP V1/V2 support and more.
  ☆52Updated 2 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆61Updated last year
• tomojitakasu / PocketSDR
  ☆429Updated 9 months ago
• torriem / QtAgOpenGPS
  A Qt C++ port of BrianT's AgOpenGPS
  ☆49Updated this week
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆98Updated 6 years ago
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 4 years ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆102Updated 2 months ago
• Xilofeon / Section-Control-for-AgOpenGPS
  ☆18Updated 2 weeks ago
• GeoscienceAustralia / ginan
  The Australian Government, through Positioning Australia (part of Geoscience Australia), is funding the design, development and operation…
  ☆291Updated last week
• u-blox / ublox-C099_F9P-uCS
  ☆62Updated 5 years ago
• ybzwyrcld / ntrip
  Simple ntrip caster/client/server example programs, using the NTRIP2.0 protocol
  ☆177Updated 2 years ago
• MechanicTony / AOG_CAN_Teensy4.1
  AgOpenGPS using Teensy4.1 and CANBUS AutoSteer Ready Tractors
  ☆34Updated 11 months ago
• pbeyssac / millipede-caster
  The Millipede NTRIP/RTK caster
  ☆31Updated last week