CentipedeRTK / docs-centipedeRTKLinks
Documentations de Centipede RTK: le réseau collaboratif de Bases GNSS RTK
☆17Updated 3 weeks ago
Alternatives and similar repositories for docs-centipedeRTK
Users that are interested in docs-centipedeRTK are comparing it to the libraries listed below
Sorting:
- Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.☆36Updated this week
- fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images☆22Updated 10 months ago
- 🛰️ 📡 Broadcasting the RTCM3 correction from the nearest RTK base 📍☆20Updated last year
- Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup☆60Updated last year
- ☆12Updated 9 months ago
- ESP32 NTRIP Interface☆61Updated 6 months ago
- Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster☆31Updated 3 years ago
- Yet Another TruePosition GPSDO☆15Updated 3 years ago
- A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …☆34Updated 5 years ago
- Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.☆97Updated 3 weeks ago
- Docker that encapsulates various GNSS processing tools☆20Updated 3 years ago
- Real time kinematics base station (ESP32 + ZED-F9P)☆38Updated 2 years ago
- GNSS Base Station based on Raspberry Pi 4B☆45Updated 2 years ago
- AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)☆41Updated 6 years ago
- DUAL or SINGLE GPS bridge between AgOpenGPS an GPS receiver. Works with 2 UBlox to calculate heading+roll. Corrects and filters. ESP32 + …☆41Updated 2 years ago
- open source rtk base☆13Updated 5 years ago
- The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.☆22Updated 10 months ago
- Centipède: un réseau collaboratif de Bases GNSS RTK low-cost☆51Updated 3 years ago
- How to set up your own RTK base station☆41Updated last year
- UM982 specific AgOpenGPS Firmware☆13Updated 2 months ago
- Python library for the UBX protocol☆38Updated 5 years ago
- A LoRa to BLE relay in 2 versions based on the new SX1262 chipset and an nRF52840. It can run Meshtastic already☆18Updated 4 years ago
- Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB☆95Updated 6 years ago
- Serial port emulation over CAN bus☆30Updated 3 years ago
- C Firmware for QingStation☆14Updated 2 years ago
- Rtklib for android linux (Userland)☆25Updated 4 years ago
- AgOpenGPS rate control.☆38Updated this week
- This project demonstrates a full RTK solution with built in correction services.☆101Updated this week
- A simple python parser for UBX messages☆26Updated last year
- Raspbian compatible RtkBase software for Unicore UM98x, Bynav M2x and Septentrio Mosaic X5☆54Updated last week