rseal / Software-Defined-Radar-Simulator
SystemC-based radar simulator to provide accurate cycle-level simulation results of commonly used SDR blocks.
☆19Updated 5 years ago
Alternatives and similar repositories for Software-Defined-Radar-Simulator:
Users that are interested in Software-Defined-Radar-Simulator are comparing it to the libraries listed below
- Open-source software defined radar based on the USRP 1 hardware.☆34Updated 6 years ago
- Phased Array Radar☆11Updated 12 years ago
- Code for paper entitled "Low Cost FPGA based Implementation of a DRFM System"☆26Updated 3 years ago
- Radar using Red Pitaya for RF: using Raspberry Pi 3 for quad-core radar signal processing☆71Updated 3 years ago
- Using Software Designed Radio to transmit LTE downlink signals at 2.4 GHz☆41Updated 5 years ago
- Multichannel RF Reference Architecture (MRFRA) code, utilities, and documentation using USRP SDR☆13Updated 2 years ago
- MATLAB toolbox for ADI transceiver products☆59Updated this week
- A High-Throughput Oversampled Polyphase Filter Bank Using Vivado HLS and PYNQ on a RFSoC☆31Updated 5 months ago
- Simulation and comparison of two alogrithms to compensate for frequency sweep nonlinearity in Frequency-Modulated Continuous-Wave (FMCW) …☆80Updated 8 years ago
- Peak sidelobe (PSL) level of binary sequences research kit. Mirror of gitlab repo: https://gitlab.com/Gluttton/PslRK .☆12Updated last year
- A bunch of Python scripts and modules built to emulate the MATLAB files of the book "MATLAB simulations for radar systems design" by Maha…☆39Updated 5 years ago
- An RFSoC Frequency Planner developed using Python.☆21Updated last year
- ☆14Updated 4 years ago
- VHDL codes to generate GPS L1 C/A and Galileo E1OS and E5 PRNs and dataless signals. Secondary codes not included.☆28Updated 6 years ago
- File Transfer with ADALM Pluto SDR☆28Updated 2 weeks ago
- Miniature 8GHz FMCW Radar☆11Updated 8 years ago
- MATLAB toolbox for ADI high speed converter products☆20Updated this week
- 64QAM Wireless communication on ADALM-PLUTO (a SDR active learning module), written in MATLAB, based on some APIs and existing functions.☆16Updated last year
- Link Budget Calculator☆17Updated last year
- Antenna array analysis tool built with Python.☆37Updated 2 years ago
- Development repo of GNSS-SDR, an open source GNSS software defined receiver. You are probably looking for https://github.com/gnss-sdr/gns…☆46Updated this week
- This repo is a compilation of code and resources for multiple SDR Platforms as part of a phased array beamforming project.☆44Updated 10 months ago
- This code generates the filter weights for polyphase filter banks with arbitrary numbers of channels, and with configurable windows.☆23Updated 7 months ago
- Python scripts to simulate and analyze phased array antennas☆27Updated 5 years ago
- GNU Radio module for Reed Solomon coded CCSDS frames☆40Updated 2 years ago
- Documents and software for the polyphase filter bank that receives Phase 4 Ground uplink signals.☆16Updated 5 years ago
- This repo contains the source code of the physical layer developed for the DARPA Spectrum Collaboration Challenge (SC2).☆11Updated 5 years ago
- Access and cotrol of PlutoSDR hardware using python bindings to libiio☆32Updated 4 years ago
- CSCS (Chirp Signal Compression Simulator) is a Matlab application for easily simulate the single/multi-target linear frequency modulation…☆22Updated last year
- DVB-S2 SDR Transceiver powerded by AFF3CT & StreamPU.☆28Updated last week