mtz8302 / AOG_GPS_ESP32
DUAL or SINGLE GPS bridge between AgOpenGPS an GPS receiver. Works with 2 UBlox to calculate heading+roll. Corrects and filters. ESP32 + Arduino MEGA
☆36Updated last year
Alternatives and similar repositories for AOG_GPS_ESP32:
Users that are interested in AOG_GPS_ESP32 are comparing it to the libraries listed below
- Software to controll the tractor from AgOpenGPS☆27Updated last year
- Script for transferring section control and speed data between AgOpenGPS and Bogballe spreaders☆14Updated 7 months ago
- ☆23Updated 3 months ago
- AgOpenGPS rate control.☆31Updated this week
- Advanced Autosteer Sketch for ESP32 - WiFi Version☆38Updated 5 years ago
- Wireless RTK Grade Program☆14Updated last month
- AgOpenGPS V5 + V4 autosteer code for ESP32☆9Updated last year
- UM982 specific AgOpenGPS Firmware☆11Updated 2 months ago
- Autosteering and RTK-GNSS units for AgOpenGPS / QtOpenGuidance☆58Updated 2 years ago
- GPS and Steer Boards☆40Updated this week
- Complete section control solution using Ag Open GPS software and arduino controler. Could be adapted on old machineries, such as sprayer,…☆14Updated 11 months ago
- AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)☆39Updated 5 years ago
- AgOpenGPS using Teensy4.1 and CANBUS AutoSteer Ready Tractors☆30Updated 8 months ago
- A Qt C++ port of BrianT's AgOpenGPS☆39Updated this week
- An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V po…☆36Updated 5 years ago
- A tool to configure the hardware components for AgOpenGPS☆12Updated 4 months ago
- A free, experimental ISO11783-6 Virtual Terminal (VT) server GUI based on AgIsoStack++☆22Updated this week
- fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images☆19Updated 3 months ago
- How to set up your own RTK base station☆35Updated last year
- ☆11Updated 3 years ago
- ESP32 XBee UART Interface☆92Updated 2 years ago
- implementation of an ISOBUS-VT on ESP32 device "M5Stack"☆23Updated last month
- A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.☆23Updated 6 months ago
- 3D grade control☆8Updated last month
- ☆50Updated 4 years ago
- Useful code to work with Ardusimple simpleRTK2B application board☆37Updated 3 years ago
- Raspbian compatible RtkBase software for Unicore UM98x, Bynav M2x and Septentrio Mosaic X5☆33Updated this week
- Section Control for AgOpenGPS for ESP32 supporting 16 sections and switches to remote AOG☆11Updated 10 months ago
- AgIsoStack++ modified for the Arduino Library Manager☆13Updated 2 months ago