Alternatives and similar repositories for QtOpenGuidance:

Users that are interested in QtOpenGuidance are comparing it to the libraries listed below

• torriem / QtAgOpenGPS
  A Qt C++ port of BrianT's AgOpenGPS
  ☆39Updated this week
• mtz8302 / AOG_GPS_ESP32
  DUAL or SINGLE GPS bridge between AgOpenGPS an GPS receiver. Works with 2 UBlox to calculate heading+roll. Corrects and filters. ESP32 + …
  ☆36Updated last year
• GormR / HW_for_AgOpenGPS
  Autosteering and RTK-GNSS units for AgOpenGPS / QtOpenGuidance
  ☆58Updated 2 years ago
• eringerli / esp32-aog
  Software to controll the tractor from AgOpenGPS
  ☆27Updated last year
• SK21 / AOG_RC
  AgOpenGPS rate control.
  ☆31Updated this week
• MechanicTony / AOG_CAN_Teensy4.1
  AgOpenGPS using Teensy4.1 and CANBUS AutoSteer Ready Tractors
  ☆30Updated 8 months ago
• AgOpenGPS-Official / Boards
  GPS and Steer Boards
  ☆40Updated this week
• jkonno / AOG_wasless
  ☆11Updated 3 years ago
• charlesquick / AOG-Bogballe-Bridge
  Script for transferring section control and speed data between AgOpenGPS and Bogballe spreaders
  ☆14Updated 7 months ago
• BlackAceIndustries / OpenGradeX
  Wireless RTK Grade Program
  ☆14Updated last month
• Coffeetrac / Autosteer_ESP
  Advanced Autosteer Sketch for ESP32 - WiFi Version
  ☆38Updated 5 years ago
• MaxVD76 / SectionControl_AgOpenGPS
  Complete section control solution using Ag Open GPS software and arduino controler. Could be adapted on old machineries, such as sprayer,…
  ☆14Updated 11 months ago
• Open-Agriculture / AgIsoVirtualTerminal
  A free, experimental ISO11783-6 Virtual Terminal (VT) server GUI based on AgIsoStack++
  ☆22Updated this week
• doppelgrau / esp32-f9p-io-board
  An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V po…
  ☆36Updated 5 years ago
• mtz8302 / AOG_Autosteer_ESP32
  AgOpenGPS V5 + V4 autosteer code for ESP32
  ☆9Updated last year
• chriskinal / AOG_Teensy_UM982
  UM982 specific AgOpenGPS Firmware
  ☆11Updated 2 months ago
• lansalot / AOGConfigOMatic
  A tool to configure the hardware components for AgOpenGPS
  ☆12Updated 4 months ago
• Coffeetrac / AG_NTRIP_ESP
  AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)
  ☆39Updated 5 years ago
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆23Updated 6 months ago
• GNSSOEM / ELT_RTKBase
  Raspbian compatible RtkBase software for Unicore UM98x, Bynav M2x and Septentrio Mosaic X5
  ☆33Updated this week
• lansalot / FreeRTK
  How to set up your own RTK base station
  ☆35Updated last year
• eringerli / RpiNtripBase
  ☆50Updated 4 years ago
• nebkat / esp32-xbee
  ESP32 XBee UART Interface
  ☆92Updated 2 years ago
• Open-Agriculture / AgIsoStack-Arduino
  AgIsoStack++ modified for the Arduino Library Manager
  ☆13Updated 2 months ago
• CentipedeRTK / pi-gen_RTKbase
  fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images
  ☆19Updated 3 months ago
• joaquinperaza / Agropilot
  Piloto automatico AgroTrack
  ☆17Updated 3 years ago
• Pat-I / OpenGrade3D
  3D grade control
  ☆8Updated last month
• raibisch / M5IsobusVT
  implementation of an ISOBUS-VT on ESP32 device "M5Stack"
  ☆23Updated last month
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 3 years ago