mtz8302 / AOG_SectionControl_ESP32
Section Control for AgOpenGPS for ESP32 supporting 16 sections and switches to remote AOG
☆11Updated 10 months ago
Alternatives and similar repositories for AOG_SectionControl_ESP32:
Users that are interested in AOG_SectionControl_ESP32 are comparing it to the libraries listed below
- AgOpenGPS V5 + V4 autosteer code for ESP32☆9Updated last year
- DUAL or SINGLE GPS bridge between AgOpenGPS an GPS receiver. Works with 2 UBlox to calculate heading+roll. Corrects and filters. ESP32 + …☆36Updated last year
- fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images☆19Updated 3 months ago
- Software to controll the tractor from AgOpenGPS☆27Updated last year
- Script for transferring section control and speed data between AgOpenGPS and Bogballe spreaders☆14Updated 7 months ago
- Complete section control solution using Ag Open GPS software and arduino controler. Could be adapted on old machineries, such as sprayer,…☆14Updated 11 months ago
- ☆11Updated 3 years ago
- A tool to configure the hardware components for AgOpenGPS☆12Updated 4 months ago
- Wireless RTK Grade Program☆14Updated last month
- implementation of an ISOBUS-VT on ESP32 device "M5Stack"☆23Updated last month
- A free, experimental ISO11783-6 Virtual Terminal (VT) server GUI based on AgIsoStack++☆22Updated this week
- AgOpenGPS using Teensy4.1 and CANBUS AutoSteer Ready Tractors☆30Updated 8 months ago
- Digi XBee® Cellular Micropython NTRIP Server (for use with Ardusimple)☆7Updated 5 years ago
- UM982 specific AgOpenGPS Firmware☆11Updated 2 months ago
- How to set up your own RTK base station☆35Updated last year
- A Qt C++ port of BrianT's AgOpenGPS☆39Updated this week
- Real time kinematics base station (ESP32 + ZED-F9P)☆29Updated 2 years ago
- Autosteering and RTK-GNSS units for AgOpenGPS / QtOpenGuidance☆58Updated 2 years ago
- Advanced Autosteer Sketch for ESP32 - WiFi Version☆38Updated 5 years ago
- AgOpenGPS rate control.☆31Updated this week
- ☆23Updated 3 months ago
- A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.☆23Updated 6 months ago
- AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)☆39Updated 5 years ago
- An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V po…☆36Updated 5 years ago
- RTK-GPS/GNSS guidance for agriculture tractor by python code☆16Updated 3 years ago
- ☆50Updated 4 years ago
- Useful code to work with Ardusimple simpleRTK2B application board☆37Updated 3 years ago
- GPS and Steer Boards☆40Updated this week
- Raspbian compatible RtkBase software for Unicore UM98x, Bynav M2x and Septentrio Mosaic X5☆33Updated this week