Alternatives and similar repositories for ntripcaster-containerised

Users that are interested in ntripcaster-containerised are comparing it to the libraries listed below

• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆120Updated last year
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆61Updated last year
• Aceinna / openRTK330-lib
  OpenRTK330 platform libraries
  ☆24Updated 4 years ago
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆95Updated 6 years ago
• baidu / ntripcaster
  ☆46Updated 7 years ago
• jdesbonnet / GNSS_RTK
  Software, scripts and data relating to GNSS/GPS Real Time/Post-Processed Kinematic sat nav
  ☆31Updated 4 months ago
• easyrtk / cors_compare
  ☆12Updated 4 years ago
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆22Updated last year
• Node-NTRIP / rtcm
  Decoder/encoder for all RTCM 3 message types up to RTCM 3.3 Amendment 1 (c10403.3).
  ☆48Updated 2 years ago
• pbeyssac / millipede-caster
  The Millipede NTRIP/RTK caster
  ☆30Updated 3 weeks ago
• Node-NTRIP / caster
  Node.js NTRIP caster library with full NTRIP V1/V2 support and more.
  ☆51Updated 2 years ago
• eringerli / RpiNtripBase
  ☆51Updated 4 years ago
• sparkfun / SparkFun_RTK_Torch
  The datasheets and documentation for the centimeter level RTK Torch GNSS receiver with built in tilt compensation.
  ☆11Updated 8 months ago
• goblimey / c-ntripserver
  BKG's reference NTRIP server with some useful tweaks
  ☆12Updated 5 years ago
• DoubleString / VrsCaster
  Caster based on rtklib 2.4.3,including self-defined vrs mode
  ☆20Updated 5 years ago
• Archfx / RTK-NTRIP-RTCM
  Contains program to Send RTCM3 📡 data to Hosted NTRIP server and fetch NTRIP data and display on another rover. Real time kinematic supp…
  ☆29Updated 2 years ago
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, SBF, QGC, RTCM3, NTRIP and SPARTN protocols
  ☆126Updated 2 weeks ago
• AviyaanTech / SW_GNSS
  GNSS data post processing tool based on RTKLIB
  ☆12Updated 3 years ago
• sparkfun / Qwiic_GPS-RTK2
  A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.
  ☆57Updated 2 years ago
• tisyang / ntripcaster
  Ntrip broadcaster written in c and libev
  ☆67Updated 5 years ago
• nunojpg / ntripserver
  Ntrip Version 2.0 Command Line Server
  ☆72Updated 10 years ago
• nunojpg / rtcm3torinex
  Real-time converter from NTRIP streamed RTCM3 data to RINEX
  ☆62Updated 10 years ago
• slgrobotics / Esp32_RTK_BaseStation
  Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster
  ☆32Updated 3 years ago
• tisyang / cors-relay
  CORS系统中继重分发程序
  ☆47Updated 5 years ago
• fguiet / gnss-rtk
  My own RTK network
  ☆26Updated last year
• semuconsulting / pyrtcm
  Python library for parsing RTCM 3 protocol messages.
  ☆102Updated this week
• CentipedeRTK / pi-gen_RTKbase
  fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images
  ☆23Updated last year
• Aceinna / rtklib_aceinna
  A version of RTKLIB optimized for single and dual frequency low cost GPS receivers, especially u-blox receivers. It is based on RTKLIB 2…
  ☆15Updated 4 years ago
• u-blox / ublox-C099_F9P-uCS
  ☆63Updated 5 years ago