miniwinwm / BlueBridgeLinks
Sharing boat data across NMEA0183/NMEA2000/Bluetooth/IoT/MQTT with Android anchor watcher app and webpage.
☆11Updated last month
Alternatives and similar repositories for BlueBridge
Users that are interested in BlueBridge are comparing it to the libraries listed below
Sorting:
- Estimate ocean wave height (or vessel heave), waves direction, and period from accelerations using IMU on esp32 using advanced Kalman fil…☆49Updated this week
- Inherited object for use NMEA2000 with ESP32 boards☆90Updated last year
- DUAL or SINGLE GPS bridge between AgOpenGPS an GPS receiver. Works with 2 UBlox to calculate heading+roll. Corrects and filters. ESP32 + …☆42Updated 2 years ago
- Script for transferring section control and speed data between AgOpenGPS and Bogballe spreaders☆16Updated 8 months ago
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆42Updated 3 years ago
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆63Updated 3 years ago
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆87Updated 3 years ago
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆33Updated 2 years ago
- UM982 specific AgOpenGPS Firmware☆14Updated 6 months ago
- AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)☆42Updated 6 years ago
- ☆15Updated 5 months ago
- Software to controll the tractor from AgOpenGPS☆33Updated 2 years ago
- Wireless RTK Grade Program☆15Updated last month
- Digital compass acting as B&G Precision 9 based on ESP32 and CMPS14☆18Updated last year
- Material für den NMEA2000-Workshop.☆49Updated 5 months ago
- ESP32 XBee UART Interface☆113Updated 2 years ago
- nmea2000 gateway with ESP32☆87Updated 3 weeks ago
- ☆17Updated last month
- An ESP32 based gateway to send NMEA2000 PGNs to a SignalK server via WLAN or USB-Serial.☆25Updated 3 years ago
- To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.☆16Updated 2 years ago
- ☆12Updated last year
- An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V po…☆38Updated 6 years ago
- Remote control for anchor chain that shows current chain lengtht via WLAN to phone/tablet.☆17Updated 5 years ago
- AgIsoStack++ modified for the Arduino Library Manager☆16Updated last year
- DIY-Windsensor based on an ESP8266 with 3D printed enclosure☆12Updated 4 years ago
- An ESP32 based gateway to read NMEA0183 AIS messages and transform them to NMEA2000 PGNs.☆39Updated 2 years ago
- fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images☆23Updated last year
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆27Updated 4 years ago
- AgOpenGPS rate control.☆40Updated this week
- CAN_Interface for ESP32 (Cannelloni Protocol)☆59Updated 4 years ago