Alternatives and similar repositories for AOG_Autosteer_ESP32

Users that are interested in AOG_Autosteer_ESP32 are comparing it to the libraries listed below

• mtz8302 / AOG_GPS_ESP32
  DUAL or SINGLE GPS bridge between AgOpenGPS an GPS receiver. Works with 2 UBlox to calculate heading+roll. Corrects and filters. ESP32 + …
  ☆41Updated 2 years ago
• GormR / HW_for_AgOpenGPS
  Autosteering and RTK-GNSS units for AgOpenGPS / QtOpenGuidance
  ☆61Updated 2 years ago
• chriskinal / AOG_Teensy_UM982
  UM982 specific AgOpenGPS Firmware
  ☆13Updated 3 weeks ago
• eringerli / esp32-aog
  Software to controll the tractor from AgOpenGPS
  ☆30Updated 2 years ago
• SK21 / AOG_RC
  AgOpenGPS rate control.
  ☆36Updated this week
• torriem / QtAgOpenGPS
  A Qt C++ port of BrianT's AgOpenGPS
  ☆44Updated 2 months ago
• CentipedeRTK / pi-gen_RTKbase
  fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images
  ☆22Updated 8 months ago
• mkameke / ZED-F9P_Raw_Data_Logger
  A raw data logger based on the u-blox ZED-F9P GNSS receiver intended for use with Precise Point Positioning (PPP) and Post-Processed Kine…
  ☆12Updated 5 years ago
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 3 years ago
• AgOpenGPS-Official / Rate_Control
  ☆15Updated 2 months ago
• AgOpenGPS-Official / Boards
  GPS and Steer Boards
  ☆49Updated 2 months ago
• MechanicTony / AOG_CAN_Teensy4.1
  AgOpenGPS using Teensy4.1 and CANBUS AutoSteer Ready Tractors
  ☆30Updated 4 months ago
• nebkat / xbee-cellular-ntrip-server
  Digi XBee® Cellular Micropython NTRIP Server (for use with Ardusimple)
  ☆7Updated 6 years ago
• charlesquick / AOG-Bogballe-Bridge
  Script for transferring section control and speed data between AgOpenGPS and Bogballe spreaders
  ☆16Updated 2 months ago
• mtz8302 / AOG_SectionControl_ESP32
  Section Control for AgOpenGPS for ESP32 supporting 16 sections and switches to remote AOG
  ☆14Updated last year
• Archfx / RTK-NTRIP-RTCM
  Contains program to Send RTCM3 📡 data to Hosted NTRIP server and fetch NTRIP data and display on another rover. Real time kinematic supp…
  ☆28Updated 2 years ago
• eringerli / QtOpenGuidance
  ☆24Updated 8 months ago
• Xilofeon / Section-Control-for-AgOpenGPS
  ☆10Updated 2 months ago
• BlackAceIndustries / OpenGradeX
  Wireless RTK Grade Program
  ☆14Updated 7 months ago
• Coffeetrac / Autosteer_ESP
  Advanced Autosteer Sketch for ESP32 - WiFi Version
  ☆38Updated 6 years ago
• lansalot / FreeRTK
  How to set up your own RTK base station
  ☆42Updated last year
• mnltake / gpsnavi
  RTK-GPS/GNSS guidance for agriculture tractor by python code
  ☆16Updated 3 years ago
• Open-Agriculture / AgIsoVirtualTerminal
  A free, experimental ISO11783-6 Virtual Terminal (VT) server GUI based on AgIsoStack++
  ☆32Updated 3 weeks ago
• jkonno / AOG_wasless
  ☆11Updated 3 years ago
• vasimv / rtkzedf9p
  Simple utility to enable internal RTK mode in Ublox ZED-F9P GPS receiver with RTKLIB-compatible output
  ☆14Updated 6 years ago
• lansalot / AOGConfigOMatic
  A tool to configure the hardware components for AgOpenGPS
  ☆17Updated 3 weeks ago
• raibisch / M5IsobusVT
  implementation of an ISOBUS-VT on ESP32 device "M5Stack"
  ☆25Updated 6 months ago
• doppelgrau / esp32-f9p-io-board
  An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V po…
  ☆38Updated 5 years ago
• fguiet / gnss-rtk
  My own RTK network
  ☆24Updated last year
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆60Updated last year