Alternatives and similar repositories for makerspet_loki

Users that are interested in makerspet_loki are comparing it to the libraries listed below

• kaiaai / awesome-2d-lidars
  Awesome 2D LiDAR list - specs, protocols, wiring, code, identification photos/videos, performance evaluations
  ☆87Updated last month
• JackDemeter / quadruped-robot
  Quadruped Robot for capstone project
  ☆53Updated 3 years ago
• XRobots / ROSremote
  ☆34Updated 3 years ago
• Lukas2233 / Rover-Project
  ☆90Updated last year
• Arctos-Robotics / ROS
  ROS files for Arctos 3D printed robotic arm
  ☆81Updated last year
• kaiaai / LDS
  Arduino LiDAR library supporting YDLIDAR X2/X3/X4, RPLIDAR A1, Xiaomi LDS02RR, Neato XV11, LD14P, CAMSENSE X1, Delta-2A/2B/2G
  ☆135Updated last month
• kaiaai / firmware
  Platform firmware for Kaia.ai compatible robots
  ☆37Updated 4 months ago
• hoverboard-robotics / hoverboard-firmware-hack-FOC
  With Field Oriented Control (FOC)
  ☆52Updated 2 years ago
• roTechnic / Robot-Arm
  ☆74Updated last year
• makerspet / makerspet_snoopy
  Maker's Pet Snoopy - a 300mm 3D-printed DIY pet robot compatible with Kaia.ai robotics software platform
  ☆19Updated 7 months ago
• fuwei007 / Navbot-EN01
  ☆115Updated 2 weeks ago
• KoshiroRobot / Simple-Smart-Servo-Driver
  ☆45Updated 8 months ago
• aaedmusa / OpenQDD-V1
  Open source 3D printed Robotic Actuator
  ☆84Updated 2 years ago
• EricYufengWu / q8bot
  Q8 Robot
  ☆172Updated 3 weeks ago
• KoshiroRobot / Ball-Balancing-Robot
  Ball Balance Robot Parts File and Program
  ☆191Updated 9 months ago
• maartenweyn / SpotMicro_ESP32
  ☆41Updated 4 years ago
• raspibotics / MABEL
  MABEL is a feature-packed, open-source, legged balancing robot based off of the Boston Dynamics Handle robot.
  ☆179Updated 5 years ago
• CGrassin / 3d_lidar
  This repository contains the code, 3D-printable files and electronics to make my 3D Lidar.
  ☆75Updated 2 years ago
• almtzr / Pedro
  Pedro the open source project designed with STEM spirit
  ☆120Updated last week
• JeongSeoJin / motor_control
  ☆61Updated 4 months ago
• hippo5329 / linorobot2_hardware
  A fork of the linorobot/linorobot2_hardware project which builds motor controller firmware for teensy, esp32 and pico to control mobile r…
  ☆25Updated last month
• Jerome-Graves / yertle
  A 3D Printed Quadrupedal Robot for Locomotion Research.
  ☆119Updated 2 years ago
• PCrnjak / SSG-48-adaptive-electric-gripper
  SSG-48 adaptive electric gripper -- Open Source gripper with force feedback
  ☆104Updated last week
• hoverboard-robotics / hoverboard-driver
  ROS hardware driver for UART-controlled hoverboard
  ☆112Updated 3 months ago
• PCrnjak / Differential-robot-wrist
  ☆110Updated last year
• mjbots / hoverbot
  Simple balancing hoverboard robot
  ☆49Updated 3 months ago
• aaedmusa / 3D-Printed-Robot-Dog
  This is a 12 DOF 3D printed quadrupedal robot that I designed. It uses 12 servo motors, a Polulu maestro servo controller, and a Teensy 4…
  ☆73Updated 2 years ago
• roTechnic / Cheats6DOFInverseKinematics
  Using IKPY to do Inverse kinematics for a 6DOF arm
  ☆43Updated 2 years ago
• Reinbert / ros_esp32cam_diffdrive
  This is a ROS 2 & Micro-ROS project to control an RC tank with differential drive (skid steering) with an ESP32-CAM module.
  ☆72Updated 2 years ago
• PingguSoft / esp32_quadruped
  quadrupedal robot using esp32
  ☆51Updated 8 months ago