Alternatives and similar repositories for nuttx-star64

Users that are interested in nuttx-star64 are comparing it to the libraries listed below

• lupyuen / nuttx-tinyemu
  Apache NuttX RTOS in the Web Browser: TinyEMU with VirtIO
  ☆23Updated last year
• lupyuen / nuttx-ox64
  Apache NuttX RTOS for Pine64 Ox64 64-bit RISC-V SBC (BouffaloLab BL808)
  ☆41Updated this week
• damien-lemoal / riscv64-nommu-buildroot
  ☆43Updated 4 years ago
• sellicott / tcc-riscv32
  Port TCC (Tiny C Compiler) to support Risc-V 32 targets (specifically for the ESP32-C3). This project is a work-in-progress and is not cu…
  ☆70Updated last month
• jevinskie / riscv-smol-linux-kernel
  Patched sources/configs for RISC-V Linux with musl-based toolchain targeting 8 MB RAM
  ☆24Updated 2 years ago
• lupyuen / nuttx-sg2000
  Apache NuttX RTOS on 64-bit RISC-V Sophgo SG2000 (T-Head C906 / Milk-V Duo S)
  ☆37Updated this week
• ultraembedded / librtos
  Very basic real time operating system for embedded systems...
  ☆16Updated 4 years ago
• damien-lemoal / buildroot
  buildroot fork
  ☆37Updated last month
• Ouyancheng / FlatHeadBro
  A baremetal experiment of Allwinner D1, without FEL
  ☆33Updated 2 years ago
• ultraembedded / riscv-linux-boot
  Trivial RISC-V Linux binary bootloader
  ☆51Updated 4 years ago
• FPGAwars / FLIX-V
  FLIX-V: FPGA, Linux and RISC-V
  ☆42Updated last year
• rtfb / riscv-hobby-os
  ☆29Updated last year
• FunKey-Project / Allwinner-V3s-BROM
  Allwinner V3s Boot ROM Reverse Engineering
  ☆17Updated 4 years ago
• machdyne / kuchen
  Kuchen Computer
  ☆23Updated last year
• starfive-tech / JH7100_Docs
  ☆62Updated 4 years ago
• mdepx / mdepx
  MDX — A BSD-style RTOS
  ☆27Updated last month
• regymm / buildroot
  buildroot fork from damien -- RV32 no MMU Linux. Run "make qemu_riscv32_nommu_virt_minimal_defconfig" then "make"
  ☆26Updated last year
• devdotnetorg / Lichee-RV
  Sipeed Lichee RV Allwinner D1 RISC-V
  ☆28Updated 2 years ago
• popovicu / linux-no-mmu-userspace-example
  ☆42Updated last year
• gregdavill / ecpprog
  Programmer for the Lattice ECP5 series, making use of FTDI based adaptors
  ☆91Updated 9 months ago
• openbouffalo / OBLFR
  OpenBouffalo Firmware Repository
  ☆36Updated 2 years ago
• michaelengel / xv6-d1
  Port of MIT's xv6 OS to the Nezha RISC-V board with Allwinner D1 SoC
  ☆105Updated 2 years ago
• dan-rodrigues / pico-hx
  PCB combining Raspberry Pi Pico and iCE40 FPGA
  ☆31Updated last year
• lxp32 / lxp32-cpu
  A lightweight, open source and FPGA-friendly 32-bit CPU core based on an original instruction set
  ☆61Updated 2 months ago
• sifiveinc / meta-sifive
  SiFive OpenEmbedded / Yocto BSP Layer
  ☆53Updated last month
• stnolting / cjtag_bridge
  🔌 Compact JTAG ("cJTAG") to 4-wire JTAG (IEEE 1149.1) bridge.
  ☆24Updated 3 years ago
• bouffalolab / bl808_linux
  ☆130Updated last year
• polarfire-soc / meta-polarfire-soc-yocto-bsp
  This repository is no longer maintained and will be archived, please see https://github.com/linux4microchip/meta-mchp
  ☆56Updated 3 weeks ago
• openXC7 / openXC7-snap
  snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support
  ☆29Updated last year
• riscv-mcu / riscv-gnu-toolchain
  GNU toolchain for RISC-V, including GCC. Tweaked for microcontrollers.
  ☆32Updated last week