Alternatives and similar repositories for usb2sniffer-qt:

Users that are interested in usb2sniffer-qt are comparing it to the libraries listed below

• xtrx-sdr / xc3sprog
  xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters …
  ☆17Updated 5 years ago
• dl3yc / fx2fw-sdcc
  FX2 replacement for USB-Blaster from http://fpga4u.epfl.ch/wiki/FX2
  ☆22Updated 10 years ago
• cyrozap / python-boundary-scan-tools
  Python tools to interact with boundary scan-capable devices. Useful for reverse engineering, testing, etc.
  ☆16Updated 8 years ago
• mithro / fx2-ftdi-emulation
  Firmware for the FX2 which emulates the FTDI serial chips (including MPSSE support).
  ☆13Updated 6 years ago
• greatscottgadgets / apollo
  microcontroller-based FPGA / JTAG programmer
  ☆69Updated last month
• greatscottgadgets / amalthea
  an experimental SDR platform
  ☆42Updated last year
• enjoy-digital / thunderscope
  LiteX based FPGA gateware for Thunderscope.
  ☆23Updated 11 months ago
• lambdaconcept / usbsniffer
  Gateware for USB2Sniffer
  ☆25Updated 3 years ago
• DangerousPrototypes / Bus_Blaster
  ☆51Updated last year
• smunaut / iua
  ice40 USB Analyzer
  ☆57Updated 4 years ago
• xtrx-sdr / xtrx-docs
  XTRX Software Defined Radio documentation files
  ☆24Updated 5 years ago
• jevinskie / litespih4x
  SPI flash MITM and emulation (QSPI is a WIP)
  ☆20Updated 3 years ago
• trebisky / ebaz4205_miner
  Bare metal programming on the EBAZ4205 board with Zynq XC7Z010 SoC
  ☆14Updated last month
• myriadrf / LimeNET-Micro
  LimeNET-Micro PCB Altium project
  ☆16Updated 5 years ago
• greatscottgadgets / python-usb-protocol
  python library providing utilities, data structures, constants, parsers, and tools for working with USB data
  ☆56Updated last month
• myriadrf / xtrx_linux_pcie_drv
  XTRX PCI driver for linux
  ☆16Updated 11 months ago
• hydrausb3 / wch-ch56x-bsp
  WCH CH56x BSP for HydraUSB3 v1 hardware
  ☆16Updated 10 months ago
• hydrausb3 / hydrausb3_hw
  HydraUSB3 V1 is an open source developer kit for the WCH CH569 MCU to experiment with streaming / high-speed protocols(USB2 HS, USB3 SS, …
  ☆32Updated last year
• sigrokproject / sigrok-dumps
  Read-only mirror of the official repo at git://sigrok.org/sigrok-dumps. Pull requests welcome. Please file bugreports at sigrok.org/bugzi…
  ☆18Updated 3 months ago
• Jana-Marie / USB-PD-Firmware
  USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware
  ☆30Updated 5 years ago
• saleae / hla-usb-pd
  USB PD (Manchester) decoder
  ☆23Updated last year
• Werni2A / CadenceOSHW
  Open Source Layouts, Footprints, Schematics, Libraries, ... for Cadence Products
  ☆11Updated 2 years ago
• ivanovp / blue_flash
  SPI NOR flash programmer using Blue Pill (STM32 development board)
  ☆18Updated 6 years ago
• hydrausb3 / hydrausb3_fw
  HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…
  ☆78Updated last year
• azonenberg / kicad-libraries
  My KiCAD libraries
  ☆15Updated last month
• tmbinc / rigol-uboot
  uboot for Rigol DS1xxxZ Oscilloscope
  ☆30Updated 7 years ago
• alexforencich / ftjrev
  JTAG reverse engineering software for FTDI compatible cables
  ☆50Updated 10 years ago
• vd-rd / hw_mpcie_gps
  Mini PCI Express GPS module
  ☆10Updated 3 years ago
• usb-tools / python-hid-parser
  Typed pure Python library to parse HID report descriptors
  ☆42Updated last year
• loxodes / phasenoise
  Prototype phase noise analyzer
  ☆19Updated 4 years ago