dimhoff / mt333x-fw-utilsLinks
Tools for updating and dumping firmware from GPS receivers utilizing the MT3333 or MT3339 chipset
☆34Updated 8 years ago
Alternatives and similar repositories for mt333x-fw-utils
Users that are interested in mt333x-fw-utils are comparing it to the libraries listed below
Sorting:
- Reverse engineering the Silabs EZRadioPRO family of sub-GHz radios☆69Updated last year
- Analyser for the ISO7816 smart cards and SIM card protocol to be used with the Logic Analyser of Saleae.☆37Updated 9 years ago
- Fork of https://gitlab.zapb.de/zapb/stm32f1-firmware-extractor☆85Updated 4 years ago
- JTAG/On-Chip-Debugger via a Raspberry Pi.☆134Updated 12 years ago
- Brute-forcing CRC parameters☆72Updated last year
- Qt-based software for USB2Sniffer☆34Updated 3 months ago
- 8Bit Nand universal reader for FTDI FT2323H Breakout Board, based on basic code from http://spritesmods.com/?art=ftdinand☆136Updated last year
- LimeNET-Micro PCB Altium project☆17Updated last month
- ☆47Updated 4 years ago
- The JTAGduino project has the goal of using Arduino as a JTAG interface.☆115Updated 11 years ago
- Implementation of the ARM SWD (Serial Wire Debug) protocol in Python for use with low-cost development boards to manage and flash Cortex …☆33Updated 11 years ago
- Library/Driver for NXP PN7150 NFC device☆26Updated last year
- CFE backup tool.☆34Updated 3 years ago
- Broadcom CFE Bootloader☆43Updated 2 years ago
- Bluetooth Low Energy SDR C++ Library☆59Updated 8 years ago
- SD/MMC Analyzer for Logic☆45Updated 4 years ago
- NuttX port to Fernvale platform☆26Updated 9 years ago
- SPI flash protocol analyzer for Saleae Logic☆43Updated 4 years ago
- Utilities for sniffing bluetooth low-energy (BLE) packets using a CC2540 USB sniffer dongle☆28Updated 5 years ago
- An implementation of the SWD protocol using the Bus Pirate☆90Updated 8 years ago
- Chipcon 1101☆21Updated 2 years ago
- CRC Reverse Engineering Tool in Python☆93Updated 4 years ago
- Reverse engineered reimplementation of the CSR USB<>SPI converter device on a Stellaris Launchpad. Will work with the original CSR driver…☆58Updated 12 years ago
- NXP's NFC Open Source Kernel mode driver☆41Updated 2 years ago
- Python library for BusPirate☆66Updated 7 months ago
- USB reverse engineering utils (capture / replay / e.t.c.)☆52Updated 3 years ago
- dump NAND FLASH memory chips☆48Updated 9 years ago
- GSG's schematic symbols and modules for KiCad☆56Updated 2 years ago
- c2tool is meant to enable in-system programming on low pin-count Silicon Labs devices using the Silicon Labs 2-Wire Interface (C2).☆10Updated 6 years ago
- Automatically exported from code.google.com/p/dangerous-prototypes-open-hardware☆86Updated 2 years ago