Alternatives and similar repositories for gowin_fpga_code_generators

Users that are interested in gowin_fpga_code_generators are comparing it to the libraries listed below

• verilog-indeed / nano4k_hdmi_tx
  Open-source HDMI/DVI transmitter for the Gowin GW1NSR-powered Tang Nano 4K
  ☆23Updated 3 years ago
• nand2mario / ddr3-tang-primer-20k
  DDR3 controller for Tang Primer 20K (Gowin GW2A-18C fpga). DDR3-800 speed and low latency.
  ☆59Updated 2 years ago
• folknology / IceCore
  IceCore Ice40 HX based modular core
  ☆46Updated 4 years ago
• emard / ulx3s-misc
  Miscellaneous ULX3S examples (advanced)
  ☆78Updated 2 months ago
• zf3 / psram-tang-nano-9k
  An open source PSRAM/HyperRAM controller for Sipeed Tang Nano 9K / Gowin GW1NR-LV9QN88PC6/15 FPGA
  ☆79Updated 2 years ago
• abhra0897 / gowin-easy-linux
  Easy setup of GoWin FPGA SDK on Linux. A single script (main_launcher) automates all the critical steps and quickly fires up the IDE.
  ☆22Updated 5 years ago
• splinedrive / my_hdmi_device
  New clean hdmi implementation for ulx3s, icestick, icoboard, arty7, colorlight i5 and blackicemx! With tmds encoding hacked down from dvi…
  ☆104Updated last week
• kazkojima / colorlight-i5-tips
  Tiny tips for Colorlight i5 FPGA board
  ☆57Updated 4 years ago
• no2fpga / no2bootloader
  USB DFU bootloader gateware / firmware for FPGAs
  ☆68Updated 11 months ago
• StereoNinja / StereoNinjaFPGA
  Experimental FPGA project for streaming two MIPI CSI camera streams to an HDMI monitor using a ULX3S FPGA board
  ☆30Updated 2 years ago
• MJoergen / HyperRAM
  Portable HyperRAM controller
  ☆59Updated 8 months ago
• blackmesalabs / hyperram
  Portable Verilog RTL interface to S27KL0641DABHI020 64Mbit HyperRAM IC
  ☆91Updated 7 years ago
• laurentiuduca / openverifla
  ☆20Updated last month
• gregdavill / ecpprog
  Programmer for the Lattice ECP5 series, making use of FTDI based adaptors
  ☆91Updated 10 months ago
• lawrie / ulx3s_examples
  Example Verilog code for Ulx3s
  ☆41Updated 3 years ago
• icebreaker-fpga / icebreaker-pmod
  Collection of PMOD boards for the use with iCEBreaker and any other FPGA board that has PMOD connectors.
  ☆91Updated last year
• ironsteel / nes_ecp5
  NES FPGA implementation synthesized for the ulx3s ecp5 based fpga board
  ☆38Updated 2 years ago
• openXC7 / demo-projects
  Demo projects for various Kintex FPGA boards
  ☆61Updated 3 months ago
• gtjennings1 / HyperBUS
  A basic HyperRAM controller for Lattice iCE40 Ultraplus FPGAs
  ☆62Updated 6 years ago
• mattvenn / first-fpga-pcb
  FPGA dev board based on Lattice iCE40 8k
  ☆72Updated 5 years ago
• ZiyangYE / General-Slow-DDR3-Interface
  A general slow DDR3 interface. Very little resource consumption. Suits for all FPGAs with 1.5V IO voltage.
  ☆38Updated last year
• mattvenn / basic-ecp5-pcb
  Reference design for Lattice ECP5 FPGA. Featuring Raspberry Pi interface and 6 PMODs
  ☆116Updated 4 years ago
• steve-m / hsdaoh-fpga
  High Speed Data Acquisition over HDMI - FPGA implementation
  ☆46Updated 5 months ago
• ultraembedded / core_usb_host
  Basic USB 1.1 Host Controller for small FPGAs
  ☆93Updated 5 years ago
• benitoss / ColorLight_FPGA_boards
  Update IceStudio to support ColorLight 5A-75X, i5 and ICeSugar Pro FPGA boards
  ☆48Updated 2 years ago
• hdl-util / hdmi-demo
  Demo of hdmi on at 720p with VGA-compatible text mode and sound
  ☆26Updated 2 years ago
• OLIMEX / GateMateA1-EVB
  Development board for GateMateA1 CCGM1A1 FPGA from Cologne Chip with PS2 VGA 64Mbit RAM RP2040
  ☆31Updated 8 months ago
• ChinaQMTECH / QM_XC7A100T_WUKONG_BOARD
  ☆34Updated last year
• gtjennings1 / UPDuino-LH154Q01-Display
  Design to connect Lattice Ultraplus FPGA to LH154Q01 Display
  ☆28Updated 7 years ago
• blackmesalabs / s7_mini_fpga
  Example designs for the Spartan7 "S7 Mini" FPGA board
  ☆28Updated 6 years ago