Alternatives and similar repositories for usb2can:

Users that are interested in usb2can are comparing it to the libraries listed below

• normaldotcom / candleLight_fw
  gs_usb compatible firmware for candleLight, cantact and canable
  ☆67Updated 3 years ago
• vladisenko / USB-CAN
  Yet another USB-CAN adapter.
  ☆12Updated 3 years ago
• karlyamashita / CANable_USB_CAN
  Open source project that uses the CANable hardware from protofusion.org
  ☆36Updated 5 years ago
• tuna-f1sh / entree
  Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!
  ☆79Updated last year
• TheRo0T / CAN-USB-STM32
  ☆64Updated 9 years ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆69Updated 5 years ago
• linklayer / cantact-pro-fw
  Firmware for the CANtact Pro
  ☆46Updated 2 years ago
• uCAN-LIN / LinUSBConverter
  LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.
  ☆74Updated 2 years ago
• Zubax / canface_cf1
  High performance CAN-USB/CAN-UART adapter + UAVCAN devboard
  ☆36Updated 2 years ago
• linklayer / busmaster
  BUSMASTER is an Open Source Software tool to simulate, analyze and test data bus systems such as CAN. BUSMASTER was conceptualized, desig…
  ☆37Updated 4 years ago
• moonglow / kvaser_cantact
  Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.
  ☆44Updated 3 years ago
• madprogrammer / stm32-can-bootloader
  STM32 CAN-bus bootloader
  ☆72Updated 8 years ago
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆101Updated 3 years ago
• darauble / lawicel-slcan
  Partial Lawicel/SLCAN implementation at 1 Mb/s CAN speed and 460800 UART baud rate
  ☆28Updated 6 years ago
• walmis / stm32-slcan
  slCAN compatible firmware for STM32f103C8T6
  ☆68Updated 3 years ago
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆58Updated last month
• IntergatedCircuits / CanDybugFW
  CAN bus gateway over USB
  ☆21Updated 3 years ago
• mpcrowe / canopen-raspberrypi
  a CanOpen Raspberry Pi Project that integrates several other projects
  ☆32Updated 5 years ago
• mxcd / CANnon
  A versatile CAN bootloader for the STM32 and friends
  ☆17Updated 7 years ago
• togglebit / CANFDuino
  ☆29Updated 5 months ago
• ryedwards / budgetcan-fw
  Firmware to support gs_usb on most STM32 devices
  ☆38Updated 3 weeks ago
• marcinbor85 / can-prog
  Command-line tool to flashing devices by CAN-BUS
  ☆79Updated 5 years ago
• suburbanembedded / hadoucan-fw
  Firmware for SM-1301 USB-CAN FD adapter
  ☆26Updated 6 months ago
• krumboeck / usb2can_firmware
  ☆17Updated 9 years ago
• MHS-Elektronik / CANcool
  Open Source CAN bus Analyser and Simulation Software
  ☆60Updated 4 years ago
• geier99 / STM32-CAN_CubeMX_Tests
  Demonstrate the use from STM32CubeMX for my STM32-CAN hardware
  ☆28Updated 8 years ago
• RashadShubita / STM32F103_LIN-bus_Example
  ☆26Updated 5 years ago
• mocona05 / CAN-BUS-TO-USB-UART-STM32F042-
  CAN-BUS TO USB-UART(STM32F042)
  ☆23Updated 8 years ago
• geosmall / UAVCAN-for-STM32-Arduino
  UAVCAN for STM32 Arduino
  ☆41Updated 4 years ago
• rusoku / CANAL-View
  CANAL View Qt GUI for TouCAN USB to CAN bus converter
  ☆22Updated last year