RudolphRiedel / USB_CAN-FD
This is an Open Source Hardware USB to CAN-FD Interface
☆55Updated 4 months ago
Related projects ⓘ
Alternatives and complementary repositories for USB_CAN-FD
- This is project SuperCAN. An open source USB to CAN-FD protocol.☆75Updated 5 months ago
- ☆44Updated 3 months ago
- Firmware to support gs_usb on most STM32 devices☆34Updated 3 months ago
- Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.☆43Updated 2 years ago
- Partial Lawicel/SLCAN implementation at 1 Mb/s CAN speed and 460800 UART baud rate☆28Updated 6 years ago
- slCAN compatible firmware for STM32f103C8T6☆64Updated 2 years ago
- LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.☆70Updated 2 years ago
- Open source project that uses the CANable hardware from protofusion.org☆32Updated 4 years ago
- Firmware for the CANtact Pro☆43Updated last year
- Implementation of Local interconnect network in c☆67Updated last year
- gs_usb compatible firmware for candleLight, cantact and canable☆61Updated 3 years ago
- Port of the Hubner Inverter to the TI C2000 architecture used by Tesla inverters.☆12Updated last year
- Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!☆71Updated 8 months ago
- CAN Bus logger with SD card implemented using ChibiOS☆67Updated 5 years ago
- ☆43Updated 5 years ago
- Vector VN1610 protocol implementation for cheap STM32F4 hardware☆40Updated 2 years ago
- ISO 15765-2 TP implementation for Arduino☆82Updated 3 years ago
- Command-line tool to flashing devices by CAN-BUS☆78Updated 5 years ago
- An implementation of the ISO-TP (ISO15765-2) CAN protocol in C☆28Updated 2 weeks ago
- STM32 CAN-bus bootloader☆72Updated 8 years ago
- ☆62Updated 9 years ago
- ☆13Updated 3 years ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆53Updated 2 months ago
- can bootloader for use with stm32 microcontrollers☆38Updated 2 years ago
- Firmware for the CANable USB to CAN adapter☆184Updated last year
- Hardware design files for the CANtact Pro☆63Updated 4 years ago
- Open source can bus analyzer software - with support for CANable / CANable2, CANFD, and other new features☆190Updated last year
- The bootloader used to flash our CAN-connected boards☆146Updated last year
- CAN bus gateway over USB☆21Updated 3 years ago
- gsusb firmware for USB CAN converter☆14Updated 3 years ago