Alternatives and similar repositories for gpsnavi:

Users that are interested in gpsnavi are comparing it to the libraries listed below

• Coffeetrac / AG_NTRIP_ESP
  AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)
  ☆38Updated 6 years ago
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 3 years ago
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆93Updated 6 years ago
• vasimv / rtkzedf9p
  Simple utility to enable internal RTK mode in Ublox ZED-F9P GPS receiver with RTKLIB-compatible output
  ☆14Updated 5 years ago
• sparkfun / SparkFun_RTK_Facet
  The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.
  ☆20Updated 6 months ago
• Coffeetrac / Autosteer_ESP
  Advanced Autosteer Sketch for ESP32 - WiFi Version
  ☆38Updated 6 years ago
• Archfx / RTK-NTRIP-RTCM
  Contains program to Send RTCM3 📡 data to Hosted NTRIP server and fetch NTRIP data and display on another rover. Real time kinematic supp…
  ☆28Updated 2 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆58Updated last year
• sparkfun / Qwiic_GPS-RTK2
  A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.
  ☆52Updated last year
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆23Updated 8 months ago
• fguiet / gnss-rtk
  My own RTK network
  ☆23Updated last year
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• mnltake / lvglnavi
  RTK-GPS/GNSS guidance for agriculture tractor using lvgl GUI
  ☆9Updated 2 weeks ago
• VimDrones / open-rtk
  open source rtk base
  ☆13Updated 4 years ago
• mtz8302 / AOG_Autosteer_ESP32
  AgOpenGPS V5 + V4 autosteer code for ESP32
  ☆10Updated last year
• mtz8302 / AOG_GPS_ESP32
  DUAL or SINGLE GPS bridge between AgOpenGPS an GPS receiver. Works with 2 UBlox to calculate heading+roll. Corrects and filters. ESP32 + …
  ☆38Updated last year
• nebkat / xbee-cellular-ntrip-server
  Digi XBee® Cellular Micropython NTRIP Server (for use with Ardusimple)
  ☆7Updated 6 years ago
• GLAY-AK2 / NTRIP-client-for-Arduino
  ☆52Updated 5 years ago
• CentipedeRTK / pi-gen_RTKbase
  fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images
  ☆20Updated 5 months ago
• slgrobotics / Esp32_RTK_BaseStation
  Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster
  ☆30Updated 2 years ago
• jangleboom / RTKBaseStation
  Real time kinematics base station (ESP32 + ZED-F9P)
  ☆32Updated 2 years ago
• mkameke / ZED-F9P_Raw_Data_Logger
  A raw data logger based on the u-blox ZED-F9P GNSS receiver intended for use with Precise Point Positioning (PPP) and Post-Processed Kine…
  ☆11Updated 4 years ago
• Korving-F / ublox
  Python library for the UBX protocol
  ☆38Updated 4 years ago
• doppelgrau / esp32-f9p-io-board
  An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V po…
  ☆37Updated 5 years ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆91Updated last month
• emlid / ntripbrowser
  CLI tool to easily get NTRIP caster information
  ☆32Updated 2 years ago
• easyrtk / cors_compare
  ☆12Updated 3 years ago
• nebkat / esp32-xbee
  ESP32 XBee UART Interface
  ☆97Updated 2 years ago
• eringerli / RpiNtripBase
  ☆50Updated 4 years ago
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆89Updated 4 years ago