Alternatives and similar repositories for buildKernelAndModules:

Users that are interested in buildKernelAndModules are comparing it to the libraries listed below

• OE4T / linux-tegra-4.9
  NVIDIA downstream Linux kernel source Jetson platforms in single-repo form, derived from the L4T R32.x series BSP
  ☆60Updated 3 months ago
• JetsonHacksNano / rootOnUSB
  Set rootfs to be on a USB drive
  ☆126Updated 5 years ago
• gtjoseph / jetson-nano-support
  ☆33Updated 5 years ago
• jtagxhub / jetpack-agx-build
  build assistant scripts for Nvidia Jetson platforms: AGX Xavier, TX2, TX1 and Nano
  ☆64Updated 3 years ago
• NVIDIA-AI-IOT / argus_camera
  Simple Python / C++ interface to CSI camera connected to NVIDIA Jetson.
  ☆87Updated 6 years ago
• JetsonHacksNano / SPI-Playground
  ☆23Updated 4 years ago
• jetsonhacks / jetson-linux-build
  Tools to build the Linux kernel and modules on board Jetson Developer Kits
  ☆68Updated 9 months ago
• valentis / jetson-nano-gpio-example
  C code example for using the GPIO Pins of NVIDIA Jetson Nano by memory mapping.
  ☆38Updated 5 years ago
• jetsonhacks / bootFromUSB
  Boot NVIDIA Nano Jetson Developer Kit from a mass storage USB device (Jetson Nano devices A02, B01, 2GB and possibly Jetson TX1)
  ☆129Updated 3 years ago
• JetsonHacksNano / installROS
  Install ROS (Robot Operating System) Melodic on NVIDIA Jetson Nano Developer Kit
  ☆77Updated 3 years ago
• jetsonhacks / buildJetsonXavierNXKernel
  Build the linux kernel and modules on board the Jetson Xavier NX.
  ☆33Updated 2 years ago
• NVIDIA-AI-IOT / jetson-min-disk
  ☆47Updated 6 months ago
• NVIDIA-AI-IOT / my-jetson-nano-baseboard
  An open source Jetson Nano baseboard and tools to design your own.
  ☆79Updated 3 years ago
• AlessioMorale / ld06_lidar
  ROS1 package for LDRobotic LD06 Lidar
  ☆39Updated last year
• Seeed-Studio / seeed-linux-dtoverlays
  Device Tree Overlays for Seeed boards
  ☆87Updated last week
• alfonsosanchezbeato / jetson-ubuntu-core
  Scripts to build images for the nvidia Jetson devices
  ☆41Updated 5 years ago
• InES-HPMM / FPD-LinkIII_Raspberry_HW
  FPD-Link III Hardware compatible with Raspberry Pi Camera and Raspberry Pi CSI connector.
  ☆48Updated 4 years ago
• RidgeRun / NVIDIA-Jetson-IMX477-RPIV3
  NVIDIA Jetson IMX477 HQ RPI V3 camera driver
  ☆130Updated last year
• alliedvision / linux_nvidia_jetson
  Allied Vision CSI-2 camera driver for NVIDIA Jetson Systems.
  ☆106Updated 3 months ago
• JetsonHacksNano / buildOpenCV
  Scripts for build OpenCV on the NVIDIA Jetson Nano Developer Kit
  ☆146Updated 3 years ago
• JetsonHacksNano / UARTDemo
  UART Demo Code
  ☆55Updated 5 years ago
• OE4T / tegra-demo-distro
  Reference/demonstration distro for meta-tegra
  ☆90Updated last week
• antmicro / ov9281-camera-board
  Camera board with a pair of OmniVision OV9281 sensors
  ☆52Updated last year
• JetsonHacksNano / installLibrealsense
  Build and install Intel's librealsense for the NVIDIA Jetson Nano Developer Kit
  ☆155Updated 3 years ago
• rbonghi / jetson_easy
  🔩 Automatically script to setup and configure your NVIDIA Jetson [Nano, Xavier, TX2i, TX2, TX1, TK1] . This script run different modules…
  ☆291Updated 4 years ago
• IntelRealSense / meta-intel-realsense
  Yocto layer for realsense-sdk and librealsense
  ☆35Updated 9 months ago
• jetsonhacks / bootFromExternalStorage
  Shell scripts to setup a NVIDIA Jetson AGX Xavier, Xavier NX, AGX Orin, or Orin Nano Developer Kit to boot from external storage.
  ☆164Updated 9 months ago
• up-board / up-community
  ☆98Updated 5 months ago
• dusty-nv / jetson-presentations
  PDF slides about NVIDIA's Jetson embedded platform and deep learning.
  ☆61Updated last year
• JetsonHacksNano / installSwapfile
  Install a swap file on the NVIDIA Jetson Nano Developer Kit. This should help with memory pressure issues.
  ☆146Updated 4 years ago