InES-HPMM / FPD-LinkIII_Raspberry_HW
FPD-Link III Hardware compatible with Raspberry Pi Camera and Raspberry Pi CSI connector.
☆49Updated 4 years ago
Alternatives and similar repositories for FPD-LinkIII_Raspberry_HW
Users that are interested in FPD-LinkIII_Raspberry_HW are comparing it to the libraries listed below
Sorting:
- FDP Link III driver for ds90ub954/ds90ub953☆50Updated last year
- Camera board with a pair of OmniVision OV9281 sensors☆53Updated last year
- Lattice Crosslink FPGA is programmed to simulate an IMX219 image stream to a Jetson Nano☆15Updated 4 years ago
- GMSL2 deserializer with MIPI CSI-2 output☆16Updated last month
- Open Hardware carrier board supporting modules with Zynq 7000 All Programmable SoC devices.☆58Updated last year
- Small Heterogeneous & AI Powered Computing SBC Based on V853☆21Updated 2 years ago
- 96Boards camera support from Deltavison :☆41Updated 7 years ago
- An open source Jetson Nano baseboard and tools to design your own.☆79Updated 3 years ago
- Driver for HDMI to CSI converter lt6911uxc☆58Updated last month
- This repo contains source, Documentation/reference PCB boards for USB3 camera interface with Lattice Crosslink NX FPGA☆14Updated 2 years ago
- Antmicro's open hardware 3G SDI into MIPI CSI-2 converter☆58Updated last year
- Antmicro's open hardware HDMI into MIPI CSI-2 converter☆90Updated 11 months ago
- Antmicro's open hardware baseboard for the Google Coral i.MX8 + Edge TPU SoM☆76Updated last year
- CSI to FDP link serializer board based on the Texas instruments DS90UB953 up to 2.3MP/60fps. Power over coax implementation at 24V cable …☆10Updated last year
- RK3588_hdk quad A76 & quad A53☆11Updated 3 years ago
- ☆42Updated last month
- Absolute Capacitive Rotary Encoder (ACRE)☆35Updated 2 years ago
- Hardware tools for non-invasively sniffing MIPI D-Phy links.☆23Updated 3 years ago
- Firmware to drive Cypress CX3 camera controller☆24Updated 8 years ago
- Analog Devices 3D ToF software suite☆71Updated last year
- Vision Components MIPI CSI-2 driver for NVIDIA Jetson Nano, Xavier NX, AGX Xavier, TX2 and Orin Nano, Orin NX☆99Updated 3 weeks ago
- Firmware, schematic and board drawings for the CANine USBC↔︎CAN adapter☆11Updated last year
- MIPI CSI-2 Camera Sensor Receiver V2 Verilog HDL implementation For any generic FPGA. Tested with IMX219 IMX477 on Lattice Crosslink NX w…☆56Updated 3 months ago
- ☆41Updated last month
- Allied Vision CSI-2 camera driver for NVIDIA Jetson Systems.☆109Updated 5 months ago
- Baseboard targetting the NVIDIA Jetson Orin Nano and Jetson Orin NX☆135Updated last week
- ☆19Updated 9 years ago
- Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!☆79Updated last year
- High performance motor control☆102Updated 8 years ago
- Build the Linux Kernel and Modules on board the NVIDIA Jetson Nano Developer Kit☆94Updated last year