Alternatives and similar repositories for uno

Users that are interested in uno are comparing it to the libraries listed below

• azerimaker / Penguino-SAMR34
  This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.
  ☆61Updated 5 years ago
• limpkin / cdm324_backpack
  CDM324 Amplification Backpack, With Case and Simulations
  ☆64Updated 8 years ago
• femtoduino / femu-hardware
  Femto ESP32 Micro USB
  ☆33Updated 4 years ago
• OSHPark / ohs18badge
  Open Hardware Summit 2018 Badge
  ☆20Updated 7 years ago
• electronut / ElectronutLabs-Bumpy
  An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.
  ☆35Updated 6 years ago
• OLIMEX / eduArdu
  Open Source Hardware Educational board based on Arduino Leonardo
  ☆23Updated 5 years ago
• femtoduino / femto-beacon
  FemtoBeacon - Atmel SAM R21 (ARM Cortex M0+, SAM D21 with built in AT86RF233)
  ☆66Updated 5 years ago
• IoTDevicesCH / LoraMidiAtmega1284P
  Small Lora(WAN) board using an Atmega1284P chip and RFM95 module
  ☆20Updated 2 years ago
• hardwario / lora-modem
  Open LoRaWAN modem for Murata Type ABZ
  ☆14Updated last year
• tralamazza / micropython
  MicroPython - a lean and efficient Python implementation for microcontrollers and constrained systems
  ☆29Updated 7 years ago
• s54mtb / lora_breakout
  Breakout board for LoRa all-in-one module CMWX1ZZABZ
  ☆13Updated 5 years ago
• gregdavill / gpsLoggerLora
  ☆21Updated 7 years ago
• ElectronicCats / BastWAN
  BastWAN is all the best in the world format Feather and LoRa with a RAK4260 and LoRaWAN
  ☆31Updated 2 years ago
• rocketscream / MiniUltraPro
  Mini Ultra Pro - Arduino Compatible 32-bit ARM Cortex M0+ Board
  ☆19Updated 3 years ago
• OLIMEX / ESP32-PRO
  ESP32 IoT board with 4MB external RAM, 4MB external Flash, LiPo charger, external crypto engine USB-OTG
  ☆51Updated last year
• ceech / BQ76920-BMS
  ☆40Updated 6 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 5 years ago
• rocketscream / RocketScreamKicadLibrary
  Rocket Scream KiCad Library
  ☆19Updated 9 years ago
• gregdavill / obsidian-boa
  Compact ESP32-S2 development board.
  ☆103Updated 4 years ago
• bwshockley / Minifigure-SAMD21E
  SAMD21E based Minifigure shaped development board.
  ☆43Updated 7 years ago
• IRNAS / PiRa-zero
  PiRA - Power in Responsive Applications HAT for Raspberry Pi Zero with RTC for power saving mode.
  ☆11Updated 8 years ago
• sparkfun / SparkFun_Artemis
  World's first open source hardware module using a Cortex-M4F capable of running TensorFlow models and Arduino sketches..
  ☆41Updated 5 years ago
• DasBasti / lcsc2kicad
  Generate KiCAD Part Libraries based on LCSC PCBA database
  ☆27Updated 2 years ago
• shridattdudhat / Raspberry-Pi-Compute-Module-4-Eagle-Footprint
  New Raspberry Pi Compute Module 4 Eagle Library and 3D Models
  ☆38Updated 3 years ago
• azerimaker / Penguino-STM32WL-LoRa-E5
  This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.
  ☆41Updated 4 years ago
• arturo182 / kicad-modules
  A repository with all my custom footprints and 3d models for KiCad
  ☆34Updated last month
• femtoduino / ArduinoCore-atsamd21e18a
  Arduino Core and Bootloader for the ATMEL SAM D21/R21 (E Variant) chips.
  ☆29Updated 5 years ago
• themainframe / thermal-camera
  Firmware for my ESP32-based hand-rolled LWIR camera device
  ☆50Updated 7 years ago
• blues / note-hardware
  ☆37Updated 2 months ago
• hallard / RAK3172-Breakout
  STM32WL LoRaWAN Breakout board for RAK3172
  ☆35Updated 2 years ago