jgressmann / supercan
This is project SuperCAN. An open source USB to CAN-FD protocol.
☆78Updated 6 months ago
Alternatives and similar repositories for supercan:
Users that are interested in supercan are comparing it to the libraries listed below
- This is an Open Source Hardware USB to CAN-FD Interface☆57Updated 2 weeks ago
- Firmware to support gs_usb on most STM32 devices☆36Updated 5 months ago
- CAN bus analyzing and simulation GUI tool for Windows.☆47Updated this week
- LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.☆73Updated 2 years ago
- Firmware for the CANtact Pro☆44Updated last year
- Command-line tool to flashing devices by CAN-BUS☆78Updated 5 years ago
- Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.☆44Updated 2 years ago
- can bootloader for use with stm32 microcontrollers☆39Updated 3 years ago
- slCAN compatible firmware for STM32f103C8T6☆65Updated 2 years ago
- Implementation of Local interconnect network in c☆69Updated last year
- An implementation of the ISO-TP (ISO15765-2) CAN protocol in C☆32Updated last month
- Readme + howto for can-j1939☆41Updated 7 years ago
- Open source project that uses the CANable hardware from protofusion.org☆35Updated 4 years ago
- The bootloader used to flash our CAN-connected boards☆146Updated last year
- ISO 15765-2 TP implementation for Arduino☆84Updated 3 years ago
- Partial Lawicel/SLCAN implementation at 1 Mb/s CAN speed and 460800 UART baud rate☆28Updated 6 years ago
- GCC 4.9.4/Binutils 2.20/Newlib Source code for Tricore Aurix☆21Updated 2 years ago
- ☆44Updated 5 years ago
- ISO 14229-1 UDS protocol implementation for Arduino☆52Updated 6 months ago
- Library to work with J1939 Frames used in CAN bus in car and trucks industries☆26Updated 3 years ago
- Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!☆76Updated 10 months ago
- ☆13Updated 3 years ago
- Vector VN1610 protocol implementation for cheap STM32F4 hardware☆41Updated 2 years ago
- ☆104Updated 7 months ago
- Library for CAN-over-Serial-Line Interfaces (SLCAN Protocol)☆36Updated 4 months ago
- The package provides SAE J1939 support for Python developers☆101Updated 3 months ago
- Hardware design files for the CANtact Pro☆64Updated 4 years ago
- An open source XCP based measurement and calibration system for automotive ECUs☆95Updated 6 years ago
- J1939 decode C library☆31Updated 3 years ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆53Updated last month