Alternatives and similar repositories for CANFDuino

Users that are interested in CANFDuino are comparing it to the libraries listed below

• linklayer / cantact-pro-hw
  Hardware design files for the CANtact Pro
  ☆73Updated 5 years ago
• linklayer / cantact-pro-fw
  Firmware for the CANtact Pro
  ☆47Updated 2 years ago
• nopnop2002 / esp-idf-CANBus-Monitor
  Monitor Canbus traffic
  ☆130Updated 4 months ago
• roboterclubaachen / usb2can
  ☆52Updated 5 years ago
• tuna-f1sh / entree
  Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!
  ☆82Updated last year
• slimelec / ollie-hw
  ☆72Updated 3 years ago
• WeActStudio / WeActStudio.USB2CANFDV1
  USB2CANFDV1, 1500V ISO, 5Mbps Max
  ☆60Updated last year
• Longan-Labs / Longan_CAN_MCP2515
  Arduino Library for CAN Bed
  ☆27Updated 4 years ago
• ryedwards / budgetcan-fw
  Firmware to support gs_usb on most STM32 devices
  ☆49Updated 3 weeks ago
• linklayer / busmaster
  BUSMASTER is an Open Source Software tool to simulate, analyze and test data bus systems such as CAN. BUSMASTER was conceptualized, desig…
  ☆40Updated 5 years ago
• aeonSolutions / PCB-Prototyping-Catalogue
  There are now, a total of 81 hardware electronics on this catalogue for Smart Devices, A.I. enabled. Designed in Kicad, and ready to dow…
  ☆91Updated last year
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆101Updated 4 years ago
• collin80 / A0RET
  CANBus reverse engineering firmware for the Macchina A0
  ☆19Updated 9 months ago
• FYSETC / UCAN
  UCAN is an open source USB-to-CAN interface board, based on STM32F072 and candleLight open source firmware, and supports linux/win/mac mu…
  ☆32Updated 2 years ago
• DanielMartensson / GoobySoft
  General software for logging and controlling devices. Controlling Modbus, CAN bus via STM32PLC etc
  ☆38Updated 4 months ago
• nopnop2002 / esp-idf-candump
  CAN Dump for esp-idf
  ☆14Updated 2 months ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆71Updated 6 years ago
• nopnop2002 / esp-idf-can2usb
  CANbus to USB bridge using esp32
  ☆31Updated 2 months ago
• rkollataj / mcba_firmware
  Michrochip CAN BUS Analyzer firmware
  ☆22Updated 8 years ago
• nopnop2002 / esp-idf-can2http
  CANbus to http bridge using esp32
  ☆45Updated 2 months ago
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆56Updated 4 years ago
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆72Updated 7 months ago
• karlyamashita / CANable_USB_CAN
  Open source project that uses the CANable hardware from protofusion.org
  ☆40Updated last month
• pierremolinaro / acan2517FD
  Distribution of Arduino driver for MCP2517FD CAN controller (CANFD mode)
  ☆77Updated last month
• karlyamashita / common_libraries
  These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.
  ☆30Updated last month
• atc1441 / CustomCanDecoderBox
  ☆42Updated 5 years ago
• IntergatedCircuits / CanDybugFW
  CAN bus gateway over USB
  ☆21Updated 3 years ago
• smartgauges / obd2-bt-stm32
  Firmware for the cheapest can sniffer
  ☆38Updated last year
• deividAlfa / STM32F429-Discovery-Oscilloscope
  ☆18Updated 4 years ago
• garagetinkering / esp32-canbus-sniffer
  ☆60Updated 9 months ago