Alternatives and similar repositories for CANFD-LIN-Gateway

Users that are interested in CANFD-LIN-Gateway are comparing it to the libraries listed below

• devcoons / iso14229
  ☆21Updated 8 months ago
• moonglow / kvaser_cantact
  Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.
  ☆46Updated 3 years ago
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆66Updated 4 months ago
• MHS-Elektronik / J1939Display
  Open Source J1939 Data Viewer for the Raspberry Pi
  ☆23Updated 7 years ago
• GaoleiBai / lin_sniffer
  Lin bus sniffer
  ☆18Updated 8 years ago
• jagumiel / LIN-Automotive
  Projects and utilities using the LIN Automotive Bus.
  ☆14Updated 3 years ago
• uCAN-LIN / LinUSBConverter
  LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.
  ☆80Updated 2 years ago
• bentearadu / Diagnostics
  Diagnostic based on UDS/KWP2000/TP
  ☆23Updated 11 years ago
• roboterclubaachen / usb2can
  ☆50Updated 5 years ago
• vladisenko / USB-CAN
  Yet another USB-CAN adapter.
  ☆12Updated 3 years ago
• jsphuebner / libopeninv
  Generic modules that can be used in many projects
  ☆30Updated 4 months ago
• tixiv / CAN-Monitor-qt
  A universal CAN bus monitoring program
  ☆74Updated 5 years ago
• ryedwards / budgetcan-fw
  Firmware to support gs_usb on most STM32 devices
  ☆44Updated 3 months ago
• karlyamashita / CANable_USB_CAN
  Open source project that uses the CANable hardware from protofusion.org
  ☆39Updated 5 years ago
• RashadShubita / STM32F103_LIN-bus_Example
  ☆27Updated 6 years ago
• nxyd / libudslin
  Unified Diagnostic Services (ISO-14229) protocol on LIN
  ☆23Updated 3 years ago
• Hirofeng / cantp
  Code implemention of ISO 15765-2 CAN transport layer.
  ☆27Updated 7 years ago
• rbei-etas / busmaster-installers
  BUSMASTER Installer Executables
  ☆17Updated 7 years ago
• linklayer / cantact-pro-fw
  Firmware for the CANtact Pro
  ☆47Updated 2 years ago
• Truck-OBD-Development / J1939_Decode
  ☆26Updated 9 years ago
• lotusczp / Lobster
  Lobster is a PC tool designed mainly for measurement, calibration, debugging of embedded system.
  ☆21Updated 4 years ago
• darauble / lawicel-slcan
  Partial Lawicel/SLCAN implementation at 1 Mb/s CAN speed and 460800 UART baud rate
  ☆29Updated 6 years ago
• rusoku / CANAL-View
  CANAL View Qt GUI for TouCAN USB to CAN bus converter
  ☆23Updated 2 years ago
• jsphuebner / tumanako-inverter-fw-bootloader
  ☆10Updated 2 years ago
• TheRo0T / CAN-USB-STM32
  ☆65Updated 9 years ago
• xjtuecho / USBCAN
  A low-cost compact USB to CAN adapter.
  ☆25Updated 10 months ago
• cpperrr / sae-j1939
  ☆13Updated 5 years ago
• as-boards / stm32f107vc
  ☆18Updated 6 years ago
• christoph2 / cxcp
  BlueParrot XCP
  ☆39Updated last week
• open-LIN / open-LIN-c
  Implementation of Local interconnect network in c
  ☆75Updated 2 months ago