Alternatives and similar repositories for FPGA_Arduino_Shield:

Users that are interested in FPGA_Arduino_Shield are comparing it to the libraries listed below

• MickMad / HACK
  HackAday Cortex Kit
  ☆18Updated 8 years ago
• mwelling / beagle-wire
  ICE40 FPGA Cape for Beaglebone
  ☆51Updated 4 years ago
• fpga-logi / logi-boards
  Boards schematic and layout (including extension boards: camera, etc)
  ☆38Updated 9 years ago
• guanix / boards
  Various PCB designs in KiCad
  ☆68Updated 10 years ago
• AnttiLukats / HackaZynq
  Open Source ZYNQ Board
  ☆31Updated 9 years ago
• MegabytePhreak / scope-footswitch
  Oscilloscope to footswitch interface for run control using USBTMC
  ☆19Updated 4 years ago
• loxodes / emc_tools
  experimental open hardware e-field and h-field probes and LISN
  ☆26Updated 2 years ago
• tinyfpga / TinyFPGA-A-Programmer
  Low-cost (or free) programmer for TinyFPGA A-Series boards
  ☆41Updated 2 years ago
• devbisme / CAT-Board
  The CAT Board is a Raspberry Pi HAT with a Lattice iCE40HX FPGA.
  ☆61Updated last year
• esden / pretty-eagle-libs
  Eagle libraries pretty footprints...
  ☆38Updated 10 years ago
• emeb / icehat
  ☆29Updated 8 years ago
• krtkl / open-source-schematics
  released krtkl schematics
  ☆57Updated 6 years ago
• AnttiLukats / OZOM-Model-A
  Open Hardware Zynq System on Module
  ☆29Updated 9 years ago
• Poofjunior / HardwareModules
  A collection of portable hardware modules
  ☆27Updated 9 years ago
• mattvenn / TinyFPGA-BX
  ☆33Updated 6 years ago
• pmezydlo / BeagleWire
  This repository contains software for BeagleWire. It is a realization of my project for GSOC-2017
  ☆46Updated 6 years ago
• f32c / arduino
  FPGArduino source
  ☆68Updated 6 years ago
• 1Bitsy / 1bitsy-examples
  Example projects for the 1BitSy development boards.
  ☆38Updated last year
• PaxInstruments / t400-electronics
  Electronics for the Pax Instruments T400 temperature datalogger
  ☆20Updated 9 years ago
• mattvenn / first-fpga-pcb
  FPGA dev board based on Lattice iCE40 8k
  ☆67Updated 4 years ago
• xesscorp / xess_fp_wizard
  A KiCad wizard to assist you in making footprints for chips having pins around the edges (SOICs, QFPs, etc.) and ball grid arrays (BGAs)
  ☆37Updated 5 years ago
• Galvant / gpibusb-firmware-arm
  GPIB to USB adapter firmware for a Cortex M0 ARM microcontroller
  ☆33Updated 10 years ago
• OLIMEX / KiCAD
  Olimex KiCAD components and footprints
  ☆67Updated 6 years ago
• mattvenn / ws2812-core
  verilog core for ws2812 leds
  ☆32Updated 3 years ago
• 96boards / mezzanine-community
  Repository for community designed mezzanine boards for the 96boards specification.
  ☆32Updated 3 years ago
• electronut / ElectronutLabs-Bumpy
  An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.
  ☆35Updated 5 years ago
• myriadrf / component-libraries
  EDA component libraries
  ☆19Updated 7 years ago
• ebenolson / kicad-plugin-arrange-like-schematic
  Kicad plugin to lay out components as they are in the schematic
  ☆26Updated 6 years ago
• mwelling / pocketbone-kicad
  Smalls mint tin sized BeagleBone (KiCAD version)
  ☆58Updated 6 years ago
• Stoney49th / OSHW-Multimeter
  First steps towards a fully open source hardware multimeter
  ☆21Updated 11 years ago