Alternatives and similar repositories for Arduino-Soft-Core

Users that are interested in Arduino-Soft-Core are comparing it to the libraries listed below

• alvieboy / ZPUino-HDL
  ZPUino HDL implementation
  ☆90Updated 6 years ago
• embmicro / mojo-arduino
  This is the base code using by the Mojo V3 to load the FPGA and act as a USB to serial port/ADC for the FPGA. This code is intended to be…
  ☆35Updated 6 years ago
• f32c / arduino
  FPGArduino source
  ☆68Updated 6 years ago
• devbisme / CAT-Board
  The CAT Board is a Raspberry Pi HAT with a Lattice iCE40HX FPGA.
  ☆62Updated last year
• AnttiLukats / HackaZynq
  Open Source ZYNQ Board
  ☆31Updated 9 years ago
• Poofjunior / HardwareModules
  A collection of portable hardware modules
  ☆27Updated 9 years ago
• mattvenn / crap-o-scope
  crap-o-scope scope implementation for icestick
  ☆20Updated 7 years ago
• scarabhardware / miniSpartan6-plus
  ☆76Updated 10 years ago
• GadgetFactory / Papilio-DUO
  Papilio DUO FPGA board
  ☆28Updated 10 years ago
• FPGAwars / Platformio-FPGA
  FPGA development in PlatformIO, using the Icestorm opensource toolchain
  ☆21Updated 8 years ago
• sfgit / FPGA_Arduino_Shield
  FPGA-based shield for Arduino
  ☆72Updated 9 years ago
• barawn / xvcd-anita
  XVCD implementation for ANITA. Note that "ftdi_xvc_core.c" is a generic libftdi-based MPSSE XVC handler, and is awesome.
  ☆18Updated 4 years ago
• AnttiLukats / Soft-Propeller
  ☆17Updated 9 years ago
• tinyfpga / TinyFPGA-A-Programmer
  Low-cost (or free) programmer for TinyFPGA A-Series boards
  ☆41Updated 3 years ago
• myriadrf / component-libraries
  EDA component libraries
  ☆19Updated 8 years ago
• wware / myblaze
  MyBlaze is a synthesizable clone of the MicroBlaze Soft Processor written in MyHDL (http://www.myhdl.org). It started as a translation of…
  ☆17Updated 12 years ago
• cyrozap / osdvu
  ☆36Updated 10 years ago
• pmezydlo / BeagleWire
  This repository contains software for BeagleWire. It is a realization of my project for GSOC-2017
  ☆46Updated 6 years ago
• GadgetFactory / Papilio-Loader
  Java and command line apps to load Xilinx Bit files to Papilio FPGA boards.
  ☆63Updated 3 years ago
• mystorm-org / BlackIce-II
  Software, Firmware and documentation for the myStorm BlackIce-II board
  ☆70Updated 4 years ago
• vpecanins / max1000-tutorial
  Tutorial and example projects for the Arrow MAX1000 FPGA board
  ☆54Updated last year
• emard / ulx3s-bin
  Quickstart binaries for flashing ULX3S to factory-default state
  ☆26Updated 3 years ago
• fpga-logi / logi-projects
  ☆65Updated 9 years ago
• mwelling / beagle-wire
  ICE40 FPGA Cape for Beaglebone
  ☆51Updated 4 years ago
• peepo / verilog_tutorials_BB
  verilog tutorials for iCE40HX8K Breakout Board
  ☆23Updated 9 years ago
• FPGAwars / iceRok
  Block probes for Icestudio => Sigrok integration (with Pulseview GUI)
  ☆33Updated 11 months ago
• emeb / icehat
  ☆29Updated 8 years ago
• cliffordwolf / icotools
  Tools and Examples for IcoBoard
  ☆80Updated 3 years ago
• lawrie / tiny_usb_examples
  Using the TinyFPGA BX USB code in user designs
  ☆50Updated 6 years ago
• udara28 / SDRAM_Controller
  Implementation of a SDRAM controller in MyHDL (http://www.myhdl.org/)
  ☆21Updated 9 years ago