Alternatives and similar repositories for digikey-barcode-reader

Users that are interested in digikey-barcode-reader are comparing it to the libraries listed below

• johnbeard / kiplot
  KiCad plotting utility
  ☆48Updated 5 years ago
• Jeff-Ciesielski / Boms-Away
  Component/BOM management tool for KiCad
  ☆96Updated 5 years ago
• cnlohr / fx3fun
  Treat your Cypress FX3 a little like a logic analyzer or software defined bus.
  ☆164Updated 4 years ago
• adamgreig / agg-kicad
  KiCAD libraries, footprints, and scripts
  ☆165Updated 3 months ago
• andete / madparts
  A functional footprint editor.
  ☆79Updated 7 years ago
• mabl / pyRigolWFM
  Python based parser for RIGOL WFM oscilloscope traces. Includes an example program to export to CSV and plotting.
  ☆106Updated 11 years ago
• mwelling / pocketbone-kicad
  Smalls mint tin sized BeagleBone (KiCAD version)
  ☆58Updated 7 years ago
• tinylabs / openfixture
  Open Source Hardware Test/Programming Fixture
  ☆117Updated 5 years ago
• colinoflynn / MeatBagPnP
  Scans barcodes on part bag, and tells you where to place part on PCB. Helps you (the meatbag) become a pick-n-place.
  ☆79Updated 4 years ago
• exclave / exclave
  Exclave embedded service runner
  ☆141Updated 2 years ago
• twlostow / assygen
  PCB Assembly drawing generator
  ☆22Updated 6 years ago
• dejan-stankovic / meetup-ad-schematic
  Introduction to reverse engineering design file formats as presented on Hardware Developers Didactic Galactic meetup on October 9th
  ☆36Updated 11 years ago
• xesscorp / xess_fp_wizard
  A KiCad wizard to assist you in making footprints for chips having pins around the edges (SOICs, QFPs, etc.) and ball grid arrays (BGAs)
  ☆37Updated 6 years ago
• OLIMEX / KiCAD
  Olimex KiCAD components and footprints
  ☆72Updated 6 months ago
• obra / kicad-tools
  Various bits of automation for using KiCAD and Git together
  ☆132Updated 3 years ago
• gregdavill / KiZip
  KiCad Plugin to package gerbers ready for ordering
  ☆36Updated 3 years ago
• LordBlick / kicadPanelizer
  KiCAD PCB panelization helper
  ☆30Updated 4 years ago
• ebenolson / kicad-plugin-arrange-like-schematic
  Kicad plugin to lay out components as they are in the schematic
  ☆26Updated 7 years ago
• devbisme / KiPart
  Python package for generating multi-unit schematic symbols for KiCad from a CSV file.
  ☆190Updated this week
• mithro / kicad-mini-pci-express
  KiCad library and templates for creating designs with Mini-PCI-express cards (both the cards and sockets).
  ☆106Updated 7 years ago
• 1Bitsy / 1bitsy-hardware
  Small breadboard friendly STM32 (eventually other mcu's too) eval boards with exposed JTAG and SWD for the use with Black Magic Probe and…
  ☆66Updated 5 years ago
• msvisser / panelize-plugin
  Automatic KiCad panelization plugin
  ☆56Updated 3 years ago
• colinoflynn / mouldyrf
  A prototyping board for various RF components
  ☆13Updated 11 months ago
• arachnidlabs / cyflash
  Bootloader tool for Cypress PSoC series microcontrollers.
  ☆45Updated 3 years ago
• wd5gnr / qrigol
  Qt assistant for Rigol DS1000 series scopes
  ☆134Updated 5 years ago
• Guntermann-Drunck / c2tool
  c2tool is meant to enable in-system programming on low pin-count Silicon Labs devices using the Silicon Labs 2-Wire Interface (C2).
  ☆10Updated 6 years ago
• provideyourown / gerbmerge
  Fork of GerbMerge from RuggedCircuits.com
  ☆52Updated 9 years ago
• KiCad / kicad-library-utils
  Some scripts for helping with library development
  ☆132Updated 5 years ago
• devbisme / PadPainter
  PCBNEW plugin that highlights pads on a PCB that meet specified criteria (part, unit, number, name, and function).
  ☆25Updated 4 years ago
• CrashBangProto / KiCad_BOM_Export
  KiCad Add-in Scrip to export and cost a BOM
  ☆20Updated 7 years ago