ffainelli / faifa
Faifa can configure any Intellon-based Power Line Communication device using Intellon INT5000 and INT6000 series chips (6000 and 6300 chips). It supports all Intellon-specific management and control frames as well as standard management frames.
☆62Updated 3 years ago
Alternatives and similar repositories for faifa:
Users that are interested in faifa are comparing it to the libraries listed below
- Userspace library to access APU2/3 gpios☆21Updated 2 years ago
- Receiver for wireless m-bus (EN 13757-4) based on the rtl-sdr☆26Updated 9 years ago
- FFT evaluation☆68Updated last year
- Hardware designs for OneRNG☆53Updated 8 years ago
- This repository contains firmware for the OneRNG entropy generator☆49Updated 9 years ago
- zJTAG is an EJTAG Debrick Utility based on BrJTAG☆12Updated 8 years ago
- Working with the 13 dollar Tzumi MagicTV.☆38Updated 6 years ago
- Driver for the Cryptotronix EClet containing an Atmel ATECC108☆35Updated 8 years ago
- CFE backup tool.☆35Updated 2 years ago
- A Linux kernel SPI-driver for the RFM12B and RFM69CW RF modules by HopeRF☆114Updated 2 years ago
- TJTAG JTAG flash programmer for WRT54G and related routers with Raspberry Pi support☆85Updated 6 years ago
- Ook-decoder reads On-Off Keying radio data commonly used in the 433MHz ISM bands using a software defined radio (SDR).☆153Updated 3 years ago
- Qualcomm Atheros Open Powerline Toolkit.☆370Updated this week
- ☆51Updated 5 years ago
- Yet another DCF77 decoder. This one is intended for the Raspberry Pi platform but might work on other devices using GPIO pins too.☆19Updated 11 months ago
- Broadcom CFE Bootloader☆40Updated 2 years ago
- Extract PGP secret keys from Gnuk / Nitrokey Start firmwares☆50Updated 5 years ago
- Utilities for the Tzumi Magic TV device☆31Updated 6 years ago
- ☆91Updated last year
- (I have long since not worked on this and I'm not actively working on it -- the design files here are for reference as it got some popula…☆1Updated 10 years ago
- A lightweight wireless sensor library for Arduino☆83Updated this week
- HomePlugAV tools to test PLC (in)security☆46Updated 5 years ago
- NCT5104D GPIO Linux Driver☆13Updated last year
- C code for NXP MIFARE DESFire cards using AES☆56Updated last year
- Whsniff is a command line utility that interfaces TI CC2531 USB dongle with Wireshark for capturing and displaying IEEE 802.15.4 traffic …☆134Updated 6 months ago
- DroidScript for easier use of the BusPirate on your Android device.☆45Updated 7 years ago
- Automatically exported from code.google.com/p/rfexplorer☆22Updated 8 years ago
- ☆35Updated 7 years ago
- Linux Pulse Per Second Stuff☆20Updated 7 years ago
- Use the arduino as a JTAG adaptor with Tjtag☆47Updated 4 years ago